Recent content by Chad03

What exactly do you mean also that you messed it up like did you strip the bolts out of? U able to provide a pic?

To be honest the best way would be to keep on doing plug checks. I know you said you had an after market exhaust on there but what’s the diameter of your exhaust pipe? With a carb that big your gonna want a pretty good exhaust on there since that big of a carb is going to be moving a lot of air...

You May just have to keep on messing with it. Just remember bigger isn’t always better when it comes to stuff like this lol. But what I did I bought this cable clamp that goes over like your clutch cable or brake cable and you screw it on and spray line through it so the cable isn’t stiff in the...

And how you was saying it idles high is your throttle cable to tight or pinched up? If there isn’t enough slack in it it’ll do that

You May get it to run pretty decent but you will prob never get it to run perfect to be honest. Just my opinion when I say this bec this happened to me. When I tried the mikuni 26-606 carb on mine with all the mods I had done to it it acted just like yours did. I could either get it to run ok...

Hello there I have a Vader 125cc and I have a 141 big bore kit on it with aftermarket exhaust and performance cam. I found out with mine that I had a genuine mikuni 26mm and it was a little to big for my application I ended up going to a genuine mikuni VM24-512 and it worked out much better was...

Hello everyone!! I have a Vader 125cc (Grom clone) and I currently installed a 141cc TBolt big bore kit in it along with the YX140 piranha camshaft. I also have a slip on exhaust and a mikuni VM22 ( not a real one a Chinese one ) with a UNI air filter on it. I’m trying to get the jetting down...