Recent content by Hock

They are cheap stock tyres

I weigh 68kg so ill run em around 28. Gonna be using em on a farm ( not sandy track)

What tyre pressure u recomend running tyres at mate? Wheels say max 40 but that seems a bit high

is it normal for the drain screw to be extremely tight? nearly stripped it...gonna replace it with higher quality

hmm i dunno thats what it says on the dhz website. it says "Mikuni 30mm Racing Carburetor"

hey guys, i attached a picture. is this my drain screw for the carb? i got a mikuni 30mm stock carb that comes on dhz dpro 160? thanks heaps!

cheers will try again tomorrow

hmm not really (im new). i got the T on my flywheel lined up with the knotch on the engine and the cam timing is correct. when im rotating the flywheel left and right the valves are not moving. if i turn the flywheel 360 degrees then twist it, the valves move up and down with the twist...

ahh sweet. also when doing valve clearences. is tdc when you turn the flywheel and the valves do not move up and down. or is tdc when you are twisting the flywheel back and forth and the valves are moving up and down. i set my valves when the valves are not moving up and down with the flywheel?

stock motor for dhz dpo 160, might be a 155z? just the stock one. and na sorry no pics but a little bit of oil, not heaps life enough to fill half the exhaust cover thingo

hey, when taking the exhaust valve cover off, is it normal for quite alot of oil to be sitting in the valve cover? thanks heaps!

Dont need to i can just put it in neutral but i thought u would be able to

no its cold but i thought this would work even when its cold

Hello all, I got a DHZ Dpro 160 and when i put the bike in gear and hold in the clutch i cannot wheel the bike around? I think this is because i need to adjust the clutch down near the engine? Would appreciate some help! Thanks!

DHZ have a lot more power and better quality parts