Recent content by Madass140

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. M

    Madass 50 5 speed

    Anyone fitted a 5 speed to a Madass 50?
  2. M

    Sachs Madass 50

    What Honda engine is the Madass 50 based on?
  3. M

    OKO 30mm tuning

    Speedo is Ebay item No, 271038974458
  4. M

    OKO 30mm tuning

    I'm still interested to try a 30mm carb, the inlet valve is 30mm, I have ported it 30mm, I tried the OKO 30mm with not much success, maybe I should try a 30mm Koso with powerjet, just looking for any possible increase in power, the 26 works great. I now have my new Koso speedo fitted so I'll...
  5. M

    OKO 30mm tuning

  6. M

    OKO 30mm tuning

    well I have my Skyteam Ace 125 pretty well all sorted and its running beautiful with the Koso 26mm, the engine is a CG125 based engine 5 speed with counterbalancer and elec/kick start, mods I've done include, 150cc,different head with bigger valves, very nice porting job, big cam,26mm Koso, nice...
  7. M

    Daytona 190cc & 150cc Anima

    Anima 190 any idea of the horsepower output?
  8. M

    OKO 30mm tuning

    yep hex jets the same, I noticed the chrome peeling off the OKO slide, it has a very BIG cutaway also compared to the small 3.5 cutaway of the 26mm KOSO
  9. M

    OKO 30mm tuning

    yep it runs the same hex jets and same slow jet, The chrome on the OKO slide is peeling off, great goin thru the motor, I'm inclined to think the KOSO carb may be a better quality unit, at least it has the Power jet. more tuning but I'm making good headway now, it sure revs high, nothing like...
  10. M

    OKO 30mm tuning

    well, the best settings with the new 26 KOSO are 38/90, needle 2nd from the top, air screw 1.5 turns out. I tried many adjustments and settings under load, I live on a steep hill, also I live 1000ft above sea level which ay account for the 90 main jet, BUT its running pretty good thru out the...
  11. M

    OKO 30mm tuning

    Well I took the advice and bought a 26mm carb, but its not an OKO its a copy called KOSO, made in Taiwan, chrome slide, looks good quality, has a Power jet unlike the OKO, it apparently only works at full throttle. I've fitted the carb with a 38 pilot and 95 main with needle in middle position...
  12. M

    OKO 30mm tuning

    if no improveent with a bit more playing around, I'll buy a 26, I tried a 36 pilot, a 37 made a slight improvement, the 42 made the best improvement.
  13. M

    OKO 30mm tuning

    Thanks for quick reply, 26mm even though the inlet port,manifold , inlet valve are 30mm?
  14. M

    OKO 30mm tuning

    New here so dont be to hard on me, if there is an OKO tuning thread, moderators please move my post there, Not Mini but of more importance is the tuning of my 30mm OKO. Engine is a Chinese Honda based CG125, mods are, 150cc, 1mm bigger valves 25mm x 30mm, big cam, ported head, opened up pipe...
Back
Top