Recent content by thumperhead

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. T

    2008 Atomik Blitz 250 review

    Great reading. Keep it coming
  2. T

    Pit Bike Repair/Parts Manuals / Exploded views

    Awesome links, thanks
  3. T

    Crossfire Manual

    Ive just brought a 2012 crossfire cfr250. Can anybody direct me to a workshop manual of even a parts catalog, they are hard to find. Thanks in advance
  4. T

    which carby

    What is the best carby for a Lifan 125cc motor??
  5. T

    Should footpeg bracket be welded to the frame

    thats what I thought. thanks
  6. T

    Should footpeg bracket be welded to the frame

    Should the footpeg bracket be welded to the frame? At the moment the footpeg bracket only bolts up onto the motor with 4, 8mm bolts. The motor is hard to keep tightly bolted still, If I welded the footpeg bracket to the frame it would help support the motor in position. Any opinions on this.
  7. T

    Rim locks

    Im having trouble keeping my rear tyre firm on the rim, It creeps around making the valve stem lean over. I only have this trouble when I use less then 15 psi, But 15 psi is too much pressure and makes the rear tyre bounce around too much. Im thinking about using "rim locks" in the rear only...
  8. T

    Seal washer in the head gasket.

    I just like new bits in the bike. I cant believe how hard it is to buy these parts.
  9. T

    Seal washer in the head gasket.

    Im replacing the head gasket on my lifan 125cc motor, I have a new head gasket [52.4mm bore] but I want to replace the "seal washer" which fits into 1 of the holes in the gasket. The seal is 14.5mm x 2.5mm. I found it on a microfiche but I cant find anywhere to buy it. Its not an o ring, its a...
  10. T

    remove front wheel bearings

    Hey thanks so much for the reply, I went and had another look and gave it a good wack with a bigger hammer and it started to move, so I wacked it more and it came out. All's good now, thanks again.
  11. T

    remove front wheel bearings

    I have a 17 inch front wheel and Im trying to remove the bearings, I have 1 side out but I cant remove the disc side bearings. It looks like there is a screw in retainer nut holding them in, but Im not sure. Can anybody help??
  12. T

    Which way does the arrow point on a Lifan head hood plate.

    I went to a bike shop and all the arrows point down
  13. T

    Which magento pack, 2 pole or 6 pole??

    My Lifan 125cc kick start only motor has a 6 pole magneto in it, but a search on ebay looks like it should have a 2 pole magneto. Looks like the 6 pole magneto is for the 140 / 150cc motor. My question is, which is better for a 125cc motor? Is one better than the other.? Thanks in advance.
  14. T

    Converting kick start to electric and kick start

    My pit bike needed a new motor so I ordered 1 off ebay. Trouble is I wanted a 125cc lifan kick start only but they sent me a electric and kick start 125cc lifan motor. So my existing wiring harness will be wrong, I dont have a battery or battery box. Is it easy to convert a bike over to...
  15. T

    Which way does the arrow point on a Lifan head hood plate.

    I removed the lifan 125cc head hood plate off my bike, then I noticed an arrow on the hood plate. I dont know if it is to point up or down. Can anybody help me out??
Back
Top