Search results

I have a 212 tillotson stage 1 mini bike with single coil, it doesn't have a battery. I'm going to wire the LED headlight to the single coil. Is there a way to wire a loud horn? There's motorcycle horns on ebay says 115dB but there's little dinky ones running on small button batteries that claim...

I'm referring to these 7/8" Handlebar Riser Clamp Kit BTW, only one half is threaded which it doesn't show the threads in the photos, or neither is threaded and the threading is on the dashboard where these bolt in, mine have recessed hex head allen key fasteners I'd rather the regular hex head...

I have this type of exposed ribbed cylindrical air filter on my tillotson 212 stage 1 kits mega moto 212 mini bike. It came with the mesh type sock/cover shown in photo. I think I say in some youtube video or something that either cloth or mesh is better for muddy/rainy/dusty conditions but that...

just assembled a mega moto 212 tillitson from GPS. I tightened the 2 U-clamps that squeeze the handle bar really well using an allen key and tapping it with a hammer instead of twisting with the hand, seems I got them as tight as possible but the handlebars slips a little forward/back, like when...

Well I've decided to keep the stock plain short bolt, because I ride woods and sometimes have to go over stumps branches etc that can be sticking up and don't want anything breaking an extension and have all the oil pour out. I've also ran the rear brake cable on the top of the frame too instead...

Turns out I can run an LED bulb with the single-coil my engine already has. Would need dual coil to run the non-LED stock bulb this bike came with, because LED needs less energy I guess. In the youtube video above GPS linked the motorcycle bulb they found can be swapped with the stock bulb. I...

Hi I'm finishing building my Tillotson 212 e-start stage 1 on a mega moto 212 frame. It came with a non-LED headlight but I didn't even bother installing it because I think I need a brighter LED, and will sell the non-LED on eBay as new. The kit didn't come with a battery but there's terminal...

Hi, I have a tillotson 212 E-start on an mega moto 212 frame. I wanna add an extension to make draining oil cleaner + easier, EDIT, I just checked before mounting the engine it seems the front OEM plug will hang over the frame for an easy clean draining but while I'm making the thread I figure...

It's 5/16-24 FINE thread, NOT 5/16-18 more common in store bins. I was able to get the stock bolt out with a giant channel lock with rubber sheet wrapped around the shaft and a breaker bar. Come to find it says 5/16 right on the bolt head (but not -24 or -18). When I used Lowe's...

Hi, I ordered a mega moto 212 complete kit with stage 1 tillotson from gopowersports. I had a very damaged box missing parts, waited for replacement parts, still some were missing and got the rest replaced. Now, when installing the torque converter onto the engine main shaft, my stock bolt...

Another issue I'm asking other MM212 owners if they have the same thing: location on frame as shown by the green star on the bottom of the frame pic with the whole frame on its side - on the underside of the tubing it's bent in and there's a crimp tool mark or something as if this was done with...

nah I don't think anything is broken off/missing, it's only partly assembled right now. the photos are just to show reference of the part I'm talking about. Basically I'm just asking for other mega moto owners to confirm or not if theirs is the same way. I forgot to mention, I banged it in...

anyone have this frame? As shown by the red circles, the bottom bearing sticks out exposed about a little less than 1/4" of it, all the assembly tutorials I watched including the official from mega moto seem to also have this gap though but it seems as though the race built into the tube that...

hopefully my last question before I finally buy something. Basically all I want is a 212 with good acceleration from a stop. A torque converter will help a bit, and stage 1 should also but not much. I'm considering a $1,000 gopowersports complete mega moto with stage 1 tillotson 212. A 212...

someone said the one without shocks comes with a TC but from videos all I found yet was the one WITH shocks comes with a simple clutch which I don't want, and youtubers saying yea why wouldn't the website mention this? I already asked GPS and the rep didn't seem to know, dodged the question and...

Finalizing a 1st mini bike order for side streets and trails. Likely going with a 212 Predator from harbor freight on a mega moto 80/105 from gopowersports or maybe a mega 212 frame since it already has a TC and dual hydrolic and I prefer the larger size but I feel way more confident I won't...

Mega Moto 80/105 Rigid Roller Frame Mega Moto 80/105 Front Suspension Roller Frame am I missing something or why is it only $10 more for the one with front shocks? And, I can't find any info on dimensions, looking for overall length including the tires is 49"? thanks

true, i didn't realize at first that the size difference between all these isn't that much compared to the moto 212 frame which I prefer overall but looks most like a chopper and thinking more likely to get me in trouble but whatever. also I been wanting a rb200 years ago when they first came...

I've basically narrowed it down to these. If I get a Coleman I'll likely sell the engine for a Predator 212 or 224cc and stage 1 it, because I'm thinking TC, parts/repair, repairs, stage kits and everything else may be easier with a Predator, despite even if there's a slight performance...

ok so I basically figured this all out now, sorta. correct me if I'm wrong: stage 1 kit is easy to do for most people and cost about $150 and increases overall power/speed but I'm not sure if it'll add much speed from a dead stop, it probably would though but not much, same with removing the...