Search results

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

  1. R

    Honda today scooter wiring !

    Hey guys, I have been looking every where for info on this bike and nothing yet. There was two ignitions sold with this bike and the one i was told worked and needed to be wired up is the wrong one. I have worked out that this bike would have had the keys missing and has since been stored for...
  2. R

    ATV go kart!

    Hey all, Having some trouble with the steering. Now i think there is a few things wrong with the set up but it's stiff and hard to turn and also very twitchy. I'm thinking that the angel part on the hub is wrong and also that nothing is in line. The steering rods are too far forward on the...
  3. R

    Honda today scooter wiring !

    Hi all. I brought a new project,a Honda today or nvs 50. It needs the ignition barrel wired up and a few things. It does turn over but no spark. Question is tho could I run pit bike wiring for it as I know way more about it and its cheap to buy and available. Any suggestions? Thanks guys
  4. R

    WTB :ATV REAR RIMS!

    Hi all. Looking for some rear atv rims, 78mm centre to centre off a 250cc atv. Can post to 4810 as well. Thanks!
  5. R

    Atv hub?

    Hi all. I have a set of rims 4 stud and center to center is around 60mm. I have a 23 tooth spline axle off a 250 cc atv. Is it posible to get a hub that fots both? Thanks.
  6. R

    ATV go kart!

    Second part of this build. I started by stripping the plastics off the four wheeler and trying to get it started. When i brought it they said "we have had it running before" which was a total lie as the wiring was so bad and the spark plug brand new aha. They had put on a new wiring harness...
  7. R

    ATV go kart!

    Hi all. Not sure where to post this but mods can move if needed. This is my latest project that i have been working on for a few weeks. I'm building a GO KART!! It started as a way to learn new skills like welding and something to have fun with. I picked up half a go kart from a mate that is...
  8. R

    PW 50 carb

    Sorry guys life has been hectic. I got the carbie and fitted it and wasn't even close to starting. So far I have an inner rotor kit,carbon reeds,de restricted exhaust and a top end rebuild (piston,cylinder and head. Also new spark plug. Normally run a 40-1 mix. I'm pretty sure it has...
  9. R

    PW 50 carb

    Hi all. I'm trying to Finnish atleast one project so looking for a pw50 carb. I got a reproduction one and didn't work. After a genuine Yamaha carbie if I can get one,my bike is 89 I think. Will pay with PayPal and will also need to send to Townsville. Thanks in advanced.
  10. R

    Possible mini bike build ?

    Thanks so much for your help. I like the idea of a small bike that can be registered as there isn't many close places to ride around here. I want something cheap and I can adapt any frames extra and do everything else . Time for a real project aha Any help finding something like a frame or...
  11. R

    Possible mini bike build ?

    hi all. I'm close to finishing some projects laying around so I have space for a new one. Thinking of building a mini bike like hondaz50 or -ct70. questions tho. I have been looking around for answers and still nothing concrete. If I get say A honda-ct70 frame with vin number could I build it...
  12. R

    125cc project

    Hi all. I haven't really done much to this motorbike since last posting. I have taken it on a few rides, run the dogs with it and just ride it. I didn't ride it for a few months and then pulled it out a few weeks back and started it up with in a few kicks :) I have been riding a bit and took...
  13. R

    Parts to Pitbike Build

    Hi all. I got a bit done today but so much more to go. I went hunting for parts and got most of what I need. I have a few spare carbies and I used two to make one good one. I cleaned it out and fitted it up. I also found out why the intake is glued on. Some one has snapped the bolt -_- it's...
  14. R

    Parts to Pitbike Build

    I think it's all hooked up ok. I wired it with a new loom but one wire wasn't put into the cover and it was singled out and I missed it. But I traced it through the second bit of shielding and it was to the cdi and it's the one that goes to the coil. I can't even remember what I have done to...
  15. R

    Parts to Pitbike Build

    Hi all. I have left this bike alone for a while. I got a project car so I could sell it and make some money. That took up a lot of time so with that all done and gone, I have some spare time and money. I have also been riding my other pit bike a bit and want a second one for my little bro to...
  16. R

    Yamaha PW50

    Hi. I checked the spark, got a boot and it's sparking well I think and it's nice and blue. I took the carbie off again and it seems to be filling up ok.There was fuel in it, I clean it all out again and it seems super clean inside. I put it together, put some fuel down the spark plug hole and...
  17. R

    Parts to Pitbike Build

    Hi. I got my new loom and wired it in with crimps and now i'm stuck on two wires. There is a yellow with black stripe on the loom and another green one at the end where it joins onto the stator :/ What could they be for. Also still no spark but i'm guessing those wires do something ?
  18. R

    Yamaha PW50

    Hi all. I had a look and the stock head fits on there with out much wiggle in the studs. Much less then the new head any way. I put the old head on after cleaning out the cylinder and still nothing.. It only sounded like it was trying to start once out of about 200 kicks. Could it be the...
  19. R

    Yamaha PW50

    I wiped it out and then oiled it with 2 stroke oil so the piston could slide in. Didn't clean out the ports. I'm not sure on the studs also. I will have to match up the old parts. There is more compression then before I think. It's hard to tell how much there should be since i'm guessing the...
  20. R

    Yamaha PW50

    Hi.Thanks for your help once again :) I don't have an air filter yet as it's still coming in the mail. What did you mean my half a turn out. Half a turn from fully seated ? I can't see good enough to see the spark :/ I really need to get my eye looked at so I will do that asap. I pulled...
Top