Search results

Yeah I think I will change my stock muffler for an oval one it rubs on the rear wheel when the rear end is fully loaded

How have the rest of you found the 160cc bigfoot?

I have found them okay, there still is about 50mm travel spare but I haven't got any huge air yet. I went with the 175ml because that is what came out of them from the factory.

Change the front and rear suspension. Up front a set of DNM M-200 with 735mm travel and on the rear a the DNM HRC shock with 310mm travel. Replace the front fork oil with 175ml of castrol 10 grade if you are about my weight. I got the set with triple clamps for $650 delivered direct from China...

Well here it is at last as promised: I bought my Atomik 160cc Bigfoot of Ebay for a bit above $700. I chose the Bigfoot over the smaller wheeled bikes because I was after a bit more ride height and stability. I know many out there are anti-bigfoot config. So once the bike arrived I undertook...

Hey can anyone tell me how much fork oil to put in each forks leg, 735mm travel dnm m-200, what weight fork oil? I weigh 85kg. I am hoping that the forks have the correct volume in them now so when I drain them I can measure what was in them

Yeah $650 for front forks and rear shock

Hey do a search on you tube there are a couple of great videos on it. use pitbike changing fork oil as your search terms

Hi Gurus I have a new set of dnm m-200 735mm front forks for my atomik 160cc bigfoot. I weigh 85kg. How much oil for each leg and what weight do you recommend Thanks

I just got my dnm m-200 735mm and matching HRC rear shock for my atomik bigfoot; best money i have spent yet

that does look like a sick little track, i got started on mine over the long week end and boy am i feeling the pain now. Fortunately had the help of a front end loader but still had to do a fair bit by hand, reckon it needs about another 2 days work

Thanks guys

Hi Gurus Wondering if someone could give me the valve clearances on inlet and exhaust valves of a YX160cc. Are there any tips or tricks in this jobs?

Hey where can you get a rec licence that you spoke about to get on the Murray Bridge track and what is it all about

yeah, its on the way now, should be here in 2 weeks.

Yeah I checked with the tech gurus here and re-measured it at least 3 times and centre of eye to eye was smack on 310mm

Dido Rip, my gear is coming out from China. I have a set of DNM 735mm M-200 up front and the DNM 310mm HRC on the rear, all fully adjustable rebound etc. Should be here in about 2 weeks. I will be keen to hear about your upgrades.... you can never have too much power :-)

Yeah! go the Atomik, I have the 160cc bigfoot and apart from a cdi that cost $6 to replace this big was cracking value for $700. Now I am fitting full DNM suspension so that it not only goes hard but will able to take the air as well...all for less that $1500

Hi guys did you see that the vics have a recreational rego system that allows them to register pitbikes etc . Someone should let Rann know there's some money to be made in this...I suppose the down side is the cops can't charge us with unreg/uninsured and pick up the court fees and fines

I am just about to buy a set of DNM M-200 front forks and DNM HRC rear shock for my 160cc bigfoot $650 so I will be interested to see what difference that makes