Search results

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. D

    Lights on Pit Bikes

    I've never needed lights or thought of having them till I went riding in the stato the other night. I had a dolphin torch strapped to the front but it gave poor visibility. I nearly was bitten by a snake on a track as I failed to see it till I rode past and it stuck at me. Anyways I want...
  2. D

    TB cam position timing

    Hi I have a z155 with an outer rotor kit with a v2 race head. I have a cam sprocket that has 2 marks either end. On the tn race cam there is a b stamped between the 2 threaded holes and on the other side between the 2 theaded holes there's a non threaded hole. My question is which was dose the b...
  3. D

    Z155 28oko or 30oko?

    Got a z155 tb v2race head tb race piston plus 30mm to 27mm manifold. I have 2 carbs oko 28mm and a 30mm oko. 28oko is real, 30mm is fake. I can use the guts out of the real 28mm in the 30mm. Which one should i use? Any one using these set up? What's ya jets and needle clip if so?
  4. D

    V2 Race head from yx160 to pitsterpro z155

    Hi all got a yx160 with a bugged bottom end so I got a spare engine which is a pisterpro Z155. Will my V2 race head off my yx160 fit the z155?
  5. D

    Xr200 exhaust

    Just picked up a honda xr200 1988 model. Only thing is the exhaust is cactus! Anyone know what else may got this bike like a crf150 exhaust that I can modify or maybe a china bike exhaust modified to fit. New exhausts are way too much and finding a cheap second hand stock exhaust is hard to...
  6. D

    Air fuel gauge

    Can you install a gauge for tunning the carb on a pit bike? If so whats the process if any one knows? I see them for about $20 online and thought it would be handy.
  7. D

    Shimming transmission/gearbox and clutch, YX160

    Is there anyone here that can explain how to shim a box, where to shim and shimming the clutch basket in easy terms to understand. I carnt seem to find much info on this seems like some people know a bit on this but don't put it up on the web. I'm just putting a new gear set in my yx160 and I...
  8. D

    WTB YX GPX 160 150 LHS ENGINE CASE ASAP!!!!

    WANTED:LHS ENGINE CASE OR BLOWN ENGINE CONDITION:USED PREFERRED PRICE RANGE: LOCATION:NORTHSIDE BRISBANE EXTRA INFORMATION:happy to pay postage CONTACT:
  9. D

    Will Tb 2v race head fit on z155?

    Wanna know if my tb head off my yx160 fit a pitster pro z155?
  10. D

    yx140 cam issues, anti kickback

    I just put a head back on my engine after I have reseated the valves and put in new piston and rings after a quick hone of the bore. Put it all back together and I have 0 compression. There is no leaks through new head gasket and head bolts are tight. So what is it? My thoughts are on the...
  11. D

    Pitster pro engine which one?

    Hi all just got me hands on a small pitty with 12 inch rims and a smaller farm compared to my yx 160 Bigfoot. The bloke I got it from said it was a pitster pro 160 r spec engine. I looked at the barrel and it's stamped z155. He said it came from dhz not sure if he's talking about the bike or...
  12. D

    Diffrent engine cases

    Hey all I gotta get a new LHS engine case for me yx 160. Anyone know if there's differences in them? I read a post in hear a while back where someone got a new one and put the motor back together and had shifting problems. What I remember is it came down to a casing mismatch. Anyone shine some...
  13. D

    Synthetic, semi synthetic or mineral oil?

    Which oil is best to run. I got a yx 160 with tb race piston and tb head and I want to protect it as good as possible! I'm just using standard motor cycle mineral oil but I like some thing to clean and protect (This is sounding like a valvoline bloody ad lol) at the end of the day it ain't worth...
  14. D

    Wrecking or sell complete GY6 150cc engine

    ITEM AND CONDITION: PRICE, PAYMENT METHODS AND TERMS OF SALE: PayPal,diret debit, CASH REASON FOR SELLING: not needed EXTRA INFO: wrecking engine but happy to sell complete. IT runs but needs new bearings in the gear box LOCATION AND CONTACT DETAILS: Northside Brisbane...
  15. D

    DHZ Decomp valve. What's this!

    Pulled my v2 race head off and seen this. Dose anyone got one of these? Seen this carbon, have I got a problem , looks like I got an air leek
  16. D

    WTB RHS crank case, 28mm manifold for YX 160

    WANTED: left hand side crank case to suit yx160. 28mm manifold suit yx 160 klx style head CONDITION:used or new PREFERRED PRICE RANGE:reasonable LOCATION:brisbane EXTRA INFORMATION: CONTACT:pm me thanks
  17. D

    Gear selecting problems yx160

    I'm having troubles shifting gears. I had my bike sitting for a few months and when I went to start it up and take it for a fang the gear leaver was jammed up. Pulled side cover off and hit shift drum around. I put it back to geather and only got 1st and 2nd. Pulled it apart again and managed to...
  18. D

    FM Transmitter & Receiver, IPhone?

    I'm looking to buy a fm transmitter and receiver but not sure which one to get. I don't want to spend too much. I want to know if they can connect multiple transmitter at once so that when your ridding with ya mates you can talk to each other and maybe have music playing when no one is talking...
  19. D

    Rear shock mounts, need help!

    I just brought a new fastace 1000 rear shock for my atomik Bigfoot. Problem being is the new shock measures 300mm from centre of bolt hole to the there centre of the bolt hole. My crappy stocko was 270mm from hole to hole. So I've cut off the mounting brackets off the frame and made some new...
  20. D

    Where to buy yx 160 engine cases

    I'm lookin all over net to get a right hand side engine case at a reasonable price. I'd like to buy from Australia but having it shipped is no prob. Any one know where?
Back
Top