Search results

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Coop88

    Valve clearance on a 155z engine

    Ive got the t on the magneto at the rope and the line on the cam sprocket is lined up but when I do a full turn the t is back at the top and there's a second mark on the cam sprocket that is lined up. So I can't tell which turn is tdc. Can sprocket has a dash then FL then another dash. Which is...
  2. Coop88

    Smoky exhaust pipe

    After running my bike for few mins today I killed it to open a gate and when I started it again fair bit of smoke came out the pipe. It's a new motor and pipe so do they smoke a bit for a while? Or is it something to do with my Carby? When it's going it doesn't smoke and the bike seems to run...
  3. Coop88

    My 155z Build

    Finally bit the bullet and got an outlaw160 from dhz. I live in southern WA and it only took 5 days to get to my door. I'm really happy with the service and postage. Was a bit of a root around to swap all the controls over to the pro taper bars but well worth it. Everything else went together...
  4. Coop88

    What size levers to get??

    Hey guys I just got my new outlaw from dhz and it came with the standard basic levers I wanna get some levers that are red. How do i tell what size/type leers they are? I dont wanna buy ones that dont fit... Can I get some asv copies off eBay or are they bad...
  5. Coop88

    Porting

    What is porting? Is in the manifold between the Carby and the engine or is it the actual inlet and exhaust part inside the head? Do I just polish down all the rough imperfections or do I actually grind away and change the metal aswell? I've got a pitster pro 155z engine that is stock as it...
  6. Coop88

    dhz post on weekends?

    ordered a bike from dhz last week they sent it on friday. i didnt think it would go anywhere on the weekend but now my tracking says it's been signed for in perth and on its way to mine (i live in southern WA) i didnt think postage happened on the weekend? be stoked if it rocks up tomorrow haha
  7. Coop88

    Is FS brand motocross gear good?

    Just found a pack on eBay with pants, gloves, jersey, shin/knee guards and chest armour for $199 and it's brand new from a shop. The logo says FS.. Ever heard of it? Just seems way to cheap to be good quality...
  8. Coop88

    sticker kit online sites?

    got links to anywhere i can get custom sticker kits made up? or just let me know how much you have paid for them. just wanna see if its worth doing or not
  9. Coop88

    how do you clean your bike?

    hey guys ive tried cleaning my bike with a pressure cleaner and it hardly does anything.. i was using detergent in warm water and scrubbing the bike down with a brush but that doesnt do much either. is there a spray on type degreaser or something that loosens all the dirt up and then i can...
  10. Coop88

    Kwik steel handle heat?

    Got a crack in my exhaust pipe and wondering if I can Kwik steel it up? It's between the muffler ad the pipe so that end would be a bit cooler than right off the head?
  11. Coop88

    Oko 26mm flatslide

    Should I put an oko 26mil flatslide Carby on my 155z engine?
  12. Coop88

    New dhz outlaw z155 Carby?

    Im looking to get a brand new outlaw off dhz with the pitsterpro 155 engine. It comes with a 30mm Mikuni Racing Carburetor should I change to the oko 26mm flat slide race Carby? Which is better? Also If I upgrade to 184bbk and v2 head will the 26 oko be ok or will I need a 28 or 30? Cheers
  13. Coop88

    how long air filters last?

    how long you reckon your air filters last on average? does the actual foam end up getting wrecked? one of my filters separated where the foam joins the rubber part but i just super glued it back together and its been fine ever since. is there a special glue you can get for that sort of thing?
  14. Coop88

    2001 xr200r price?

    I know it's not a mini but you guys seem to know your stuff so thought I'd post here I've got an xr200r 2001 model that I wanna sell. Runs fine I did the valves and Carby other day and it actially idles now haha New sprockets and chain and new air filter Could do with new plastics but they're...
  15. Coop88

    Dhz outlaw 160 top speed?

    Dhz spec list says up to 120ks is thatt just bull**** or can it actually go that fast?
  16. Coop88

    184 bbk and v2 race head

    Can I put a 184 bbk and a v2 race head on a outlaw160r? Can you have both or is it better to do one or the other? Any ideas thanks
  17. Coop88

    whats flatslide carby?

    sorry for the silly questions but whats a flatslide carbi and why is it better? i see a lot of blokes on here stoked about getting one
  18. Coop88

    dhz outlaw 160r question

    im looking to buy a dhz outlaw 160r for $1750 because i dont really wanna spend much more than that atm.. anyone have that bike or ridden one? i just wanna know if the zong 160 engine has pretty good power and pulls good? im not racing or anything so i dont need a monster engine.. but im...
  19. Coop88

    fuel flowing out of carby overflow

    hey my carby is pissing fuel out the overflow and stops when i turn the fuel tap off i took my whole carby off today and it was clean as a whistle and the float and everything looked fine put it back on and still same problem... also what happens if you just block off the overflow so nothing...
  20. Coop88

    v2 race head

    what does a v2 race head do? ive seen a lot of people saying theyve added it on. what does it do?
Back
Top