Hi all. I brought a new project,a Honda today or nvs 50. It needs the ignition barrel wired up and a few things. It does turn over but no spark. Question is tho could I run pit bike wiring for it as I know way more about it and its cheap to buy and available. Any suggestions? Thanks guys
Hi all. I have a set of rims 4 stud and center to center is around 60mm. I have a 23 tooth spline axle off a 250 cc atv. Is it posible to get a hub that fots both? Thanks.
Hi all. Not sure where to post this but mods can move if needed. This is my latest project that i have been working on for a few weeks. I'm building a GO KART!! It started as a way to learn new skills like welding and something to have fun with.
I picked up half a go kart from a mate that is...
Hi all. I'm trying to Finnish atleast one project so looking for a pw50 carb. I got a reproduction one and didn't work. After a genuine Yamaha carbie if I can get one,my bike is 89 I think. Will pay with PayPal and will also need to send to Townsville. Thanks in advanced.
hi all. I'm close to finishing some projects laying around so I have space for a new one. Thinking of building a mini bike like hondaz50 or -ct70. questions tho. I have been looking around for answers and still nothing concrete. If I get say A honda-ct70 frame with vin number could I build it...
Hi all. I got this second hand motor for my new project bike but the wiring looks strange to me. There is two sets of wires coming from the engine and I don't know what they do.
I have looked around but can't find out exactly what they are and what they do and if I can just chop them out so...
Hi all. I'm starting a build that I like to call. Parts to pit bike.
I recently finished my last bike to a point that I was happy with.It's a mix of three or four bikes, maybe more that I made into one over the years. I also used second hand parts and ebay items to make my bike :) It turned...
Hi all. I'm having trouble with my peewee again. I got a new copy carbie and then went to start it and nothing , so I pulled the plug and there is no spark. It only recently had a new coil put on and a new plug but the plug has been in there when it was running super rich.
I'm not running...
Hi all, I'm not sure that this goes here but i'm having trouble with this 4 wheeler.
The wiring is a bit messed up but the light near the key turns on and when you push the start button , the solenoid clicks. But it doesn't make the starter go.
When I bridge the solenoid the starter...
Hi all. I have a 80's peewee I think but it's been running a bit sick under load. So I went to adjust the carbie and found what I think is the stock settings of about 2 turns out on the mixture and then turn that in or out till it idles really high and then fix it with the idle screw.
Any...
Hi all , My peewee is having trouble starting and takes a few kicks when it used to take just one. And when it starts to run, it dies and then you start it up and repeat that a few times and then it runs ok. And when you lift the back wheel up, it revs out and goes good.
But when you ride it...
Hi guys. I'm thinking about swapping a set of stock forks for a set of usd forks but they are missing the top tri clamp.
I know you can get the tri clamp set but is it possible to get just to top one.
Also fair trade ?? I will just keep them for a spare set.
Thanks
Hi all , I'm looking to get some more power out of my pit bike. I have re jetted the carbie,new air filter , ngk spark plug, port matched and cleaned out intake manifold, and a re packed muffler and got a new sprocket set up yet to be tested to get more top end power and use the more of the...
Hi all. After finding out my swing arm bolt was rusty and stuck into my frame. I tried to get it out and snapped it.
So i'm looking for a replacement. I Want to get a high tensile or heavy duty one because it's only 10mm x 210 but I can't find one any where. There isn't any in town so I will...
Hi all, This is my PW50 that I fixed up and got going. I know it's only a peewee and it's only for a bit of fun.
I got it off my cousins because they were making room in there shed and were throwing it out so I took it :) I put it in the back of my tiny hatch back and brought it 300kms home...
Hi all. I got a parts bike with a full loom but the key barrel has been cut off and all the wires are taped together. The bike starts when you kick it but I want to get the electric start working if it's possible.
So will it affect the way the electric start works if there is no key barrel ...
Hi all. I have a 125 pit bike, kinda a mix of a atomik,orion,ducar engine, with a minkuni carbie with the electrics of the atomik running it all mixed with some new parts..
Anyway , I cleaned out the carbie and jets and put it all back together with the stock setting of one and a half to two...
Hi all.I'm new here.
I recently got a new bike after having a few motorbikes over the years because I really started to miss not having one. I used to have a mad pit bike that I built over a few years and modified a bit. I was half way though a big tear down and re paint when I got my first...