Search results

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. I

    Learn to Count with Pictures!-game-

    Another nice way to pass the time
  2. I

    2013 Atomik Fury 250cc Review/Build thread

    Offers there any time buddy. Check bearing sizes and give Alls Balls Racing a call. I reckon the bearings will be an exact copy of a set off a Jap bike. I had a good run with them in the boys pit bike and will use them again when my bike needs them. As for the severe rattle is it the bearings...
  3. I

    2013 Atomik Fury 250cc Review/Build thread

    Hey Blender I've got time off next week if you want me to bring the shock down to test fit. Takes a hell of a lot of guess work and anxiety out of deciding whether or not to buy one and I would be happy to blast down on the Speed Triple for a run. Let me know if your free or keen. I got a few...
  4. I

    2013 Atomik Fury 250cc Review/Build thread

    Yeah mate just big stainless washers. Also forgot to give you the mount measurements. Top is 21mm across and bottom is 23mm between the forked legs. Do some checking that the spring diameter is not too wide and wont rub on anything, mines very close in a few spots.
  5. I

    2013 Atomik Fury 250cc Review/Build thread

    I saw the klx300 shock on ebay aswell. Not sure on its spec so cant say. The geometry of the linkage really matters. If the triangle is flatter, or the two ends closer or the proportion between the end and the centre is vastly different to yours then it will be a gamble. Do some research and sus...
  6. I

    2013 Atomik Fury 250cc Review/Build thread

    Ohhh and I used the standard linkages with the Blitz, I did not get the KLX linkage.
  7. I

    2013 Atomik Fury 250cc Review/Build thread

    It was the shock reservoir that was the issue, had to bend the pipe down at the u turn coming out of the engine then that gave the angle to get under the reservoir and then bend it back up just after the reservoir so it still bolted onto the original mount hole for the pipe. All in all only...
  8. I

    The I'm just doing thread

    Reading through everything I have missed right here while I have been busy rebuilding utes, surviving marriage, keeping mowers running, work, work blah blah etc. Good to be back. Sons looking for a bigger bike so its trolling time on the interweb. Deciding if we chuck motard wheels on the pitty...
  9. I

    2013 Atomik Fury 250cc Review/Build thread

    Blender, The linkage on mine was bad too, seems all the Blitz's (from what I have read) had the linkage bolts that were about a quarter mil smaller than the diameter inside the bearings, allowed for movement in all three linkages. I replaced all the linkage bolts but that didnt really do much...
  10. I

    2009 Puzey XTR 250cc - $100 bargain

    Just be careful with that engine. Its apec'ed as a atv/quad and if you check the specs from the site it has reverse and 4 up. The motor is essentoally the same as mine and your Loncin **170mm but the geardox is obviously diff. Good luck with the search.
  11. I

    2009 Puzey XTR 250cc - $100 bargain

    Hey Rikchick, long time but Im back on deck after doing my back in a few months ago. The original motor in your Puzey is exactly the same as mine in the Mikilon "Thing" which is exactly the same as the blitz. So you should be able to grab one around the place somewhere, or I even priced one...
  12. I

    Oops I did it again, she played with my heart, Lifan 140cc

    Gday Riki and all. The carby was off a new Blitz (copy) running the Loncin water cooled 250 so the jetting is not the standard pit bike, it was definitely 100 main and 20 pilot. I used it once, had it running sweet but was not overwhelming. Riki from the sounds of it the pilot is too big if...
  13. I

    2008 PitPro Lifan 125

    Yeah making manifolds is a chore, haven't tested it yet but I have seen plenty of bendy ones for the 125 horizontal engines. I hears a hew people talk about bringing them out the front....not an option with the WR layout ?
  14. I

    GAME: get to 25 :)

    do it Blender take em down
  15. I

    GAME: get to 25 :)

    24 and someone drop this monster
  16. I

    GAME: get to 25 :)

    you need to make it 23 rollas we doubled up on 22
  17. I

    GAME: get to 25 :)

    22 Far Knelll
  18. I

    GAME: get to 25 :)

    ok 21 then start drinking yankees
  19. I

    GAME: get to 25 :)

    20 SCORE !!! 5 to go
  20. I

    GAME: get to 25 :)

    I smell 18, its a legal age now, free for all
Back
Top