Search results

Hey everyone. I got a old 2001 kx85 yesterday and me and my brother have been workin on it ever since trying to get it back in running order seeing As its been very neglected. The bloke I baught it off said it had just had a rebuild and taken for a few rides then left in the shed. Won't go into...

Just wondering about the details of this bike that I can't find. Like axles sizes, spline size for front sprocket and any other usefull info about the bikes that isn't on the atomik site of eBay Thanks in advance

Can't find any swing arms with 12mm wheel axle and 10mm frame axle ? The swing arm on my brothers bike is very old and weak so I'm trying to find a new one for him but can't find anything! It has 12mm wheel axle and 10mm frame axle. Not sure what the frame ad swing arm came off but I think it...

What causes a bent axle? Was doin 6ft+ jumps but usealy it handles them no worries.. Berings are getting chewed up and spit out every ride.. Could a bad bearing or loose bearing cause it to bend? Is a 15mm axle and my brother was hitting the same with a 12mm axle witch is fine still

Got a crack in my brothers lifan 1p54 125cc cylider that leaks oil, how did this happen? Overheating because of prolonged lean condition that over hardened the metal causing it to crack rather than bend or warp?? Just don't want the same thing to happen to my lifan.. Probably n the verge of...

Revs sort just drop off then pick back up and drop off again when I give it more than 3/4 throttle, doseit in gear and nutrle, engines a lifan 125 with a mikuni copie on it.. Plug is black ( again ) replacing fule filter and switch got it running good again but now after running fine, it's...

Just wondering if a genuine vm26-606 mikuni will go any good on a lifan 125? currently have a copy mikuni 26 that has a 95 main jet and a 15 pilot jet, on eBay it says the genuine ones have 190 main and 22.5 pilot, seems like a bit of a radical change.. Runs good with the copy, would it be...

Hey, every time I get back from a ride and wheel my bike in I always hear a click from my front wheel about evry Couple of spins? It's defently somthing to d with the brakes.. All spokes are tight and rim is nice and true, new brake disc, New triple clamps that actualy fit the fork legs...

Hey everyone! Just wondering pros and cons of 2strokes compared to 4's matenince wise? Always liked the snappy power of 2 strokes.. But it sounds to me like they are a pain to look after/ keep on top of compared to 4 strokes? Plus I hate mixing fule haha I've also heard that 2 stokes are a bit...

Hey,I've put a stock flywheelback on my bike ( ifyouve read previous threads of mine.) to see if it was the lightened flywheel effing it up, but it's still not right.. Just cuts out at random times, mostly mid range to wot but it's not a dirty carb or main jet, pulled all that apart and it's...

Hey guys, lightened my flywheel a while back for more acceleration, got lots more! But dose feel like I've lost some speed.. Dose lightening them take away some top speed? I don't see why it would baut can see how lightening it helps it get going quicker.

Hey guys, I have made a slip on muffler mod by cutting a old muffler in half removing packing and baffle and bolting it on to my original muffler (becausei have read that it can help with acceleration) and to me it dose seem to help get the engine to a high rpm faster. Just wondering if anyone...

Hey everyone, I got a new pair of triple clamps in the mail today because my old ones were about t crack apart and weren't the right size for the forks (45mm 45mm top and bottom ) I needed 48 for the bottom and 43 for the top. Anyway.. I've assembled them on the frame leaving the top plate off...

Hey everyone, mustpro came with a mikuni "26" mm says 22 on the side of it anyway.. So not sureit it's a copie or not.. Is a oko one better? Or is it just as good as mikuni ex ? Because they both say they are a good prefomanceupgrade ( value for money wise ) exept I already have a mikuni one? Is...

Hi guys, am wondering what air filter would be best for dusty/ muddy riding conditions or just normal conditions on a 125 lifan with a "26" mikuni carb ? I have a mushroom pod filter on ATM and a uni one layin around, the one that's on there is this one Performance Sports Racing AIR Filter 38mm...

Got a pair of shock extender's in the mail the other day and chucked one on my bike, they look/feel pretty flimsy.,not to sure how it is goin to hold landing jumps :/ anyone used these to extend a shock that is to short? And how did they hold up if so ? :) could save me havin a wicked stack hahaha

Got a pair of Forks off a cheap TDR on eBay and when I changed the oil in them there was a thick plastic kind of Washer below that big nut at the top of the tube and around the lock nut on the rod, but it was broken, soi chucked oThe of them away because I didn't want little bita plastic all...

Pretty keen on goin for a strap, but I am waiting on my local bike shop to get some more brake pads in and they have the originals, would just take the brakes (rear) off but it's partof the spacers and I would need a longer spacer for the rotor side which I don't have, so will I damage the rotor...

Just got a new shock and the rear axle, swinger axle and front sprocket are in a perfect line .. Dose that mean that the chain will go loose instead of tight when I sit on it? Can't sit omit because waiting for parts to put back wheel assebaly all back on

I couldn't spin my front wheel properly ( rotor gets caught in the pads ) so I loosened off the brake caliper mounting bolts, and it spin's perfectly.. How should I fix this ?