Search results

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. AntNZ

    oko,round vs hex jets

    I just got a oko24mm for a stock 110 engine but it has small round main jets in it not the usual hex jet. are the numbers on the round jets the same sizing as the hex jets?? can I use my standard hex jets if the bowl is deep enough?? will I have to change float height if I use the longer hex...
  2. AntNZ

    Anima 190 Cdi??

    Hi, I have installed a anima190 into my lxr 14 over the last week, been a mission but have had it running only for few seconds then stopped. Fuel tap was off.. Easy fox! Haha My main question is.....how many wires should be coming from Cdi for the rev limit settings?? I only have 3, a...
  3. AntNZ

    hydraulic clutch??

    I bought a china hydro clutch a while back and beena bit hesitant to install as yet as the bracket on the engine needs to be modded to make it work... questions are.... how do you bleed these suckers as they have no bleed nipple? as it sits now(on the bench) you have to pull the lever...
  4. AntNZ

    160ho...splitting cases??

    hey spanner spinners.... I am about to attemt splitting cases for the first time to sort out a gearbox issue, just wondering if there are any tips for first timers..haha i.e, should I lay the engine on 1 side and pull 1 half off...left or right side or just sit engine in natural position and...
  5. AntNZ

    LXR alloy subframe...

    So after a epic FAIL on my pitty last night I am now in need of a new alloy subframe for my LXR, anyone know where I can get one??? Do I need to get an LXR specific subframe or are there others out there that will fit?? cheers
  6. AntNZ

    160ho clutch or g-box??

    Hi all... riding my pity last wknd and it started slipping the clutch(i think). The engine only has 6 hrs on it from new so hoping its nothing major. It just started doing it all of a sudden and only under power/load, at first i thought the chain might be jumping teeth on the sprocket but...
  7. AntNZ

    Z160ho HD valve springs??

    Hi, Does anyone know where I can get some HD valve springs that will fit the stock head on a z160ho?? I like the power the stock motor produces but it revs to valve float/bounce way too quickly. Do the YX valve springs fit the zonga head, are they any better than the stock zonga springs...
  8. AntNZ

    Ngk lead/Takegawa coil?

    I have got a new ngk racing cable and takegawa hyper ignition coil and wondering how I join the ngk cable to the takegawa coil? The takegawa coil comes with a short portion of cable with no plug cap but is a sealed unit where the lead goes into the coil. Help please??? Thanks
  9. AntNZ

    gpx 110 high comp race engine jetting??

    I convinced one of my mates to buy a second hand 2012 lxr. the original 160ho has been taken out and been replaced with a gpx110 race engine to be able to compete in the 65cc 2smoke class national comp here in NZ. The 110 has 6hrs on it and the original 160ho also came with the bike +an...
  10. AntNZ

    lxr fork oil amount/weight?

    Hi I have 2 lxr's , a 14 and 12. Anyone know how much fork oil they hold and what wt should I go for? I weigh 80-85kg. The lxr14 has 790mm forks and the 12 has 760mm forks, I presume from what I have read that they are gpx black labels?? What wt is in them from factory?, and how many mls...
  11. AntNZ

    Anyone with an LXR....

    Hi,just got my second lxr today, brand new (in crate) nitro circus lxr12. A few things different than my other lxr, jap mikuni carb...not sure what size, and alloy sub frame, different exhaust system. First thing I looked for was the angle of the subframe coz the first lxr I got was well out...
  12. AntNZ

    TB v2 race head upgrade?

    Hi, I'm thinking of upgrading the head on my stock 155/160HO engine with the TB v2 race head and matching piston and titanium retainers. The v2 head has a 27mm intake port so was wondering whether i would need a larger diameter intake pipe and will my current oko26mm carb still be fine with...
  13. AntNZ

    155/160 HO, no spark!

    Hi guys, Was having issues with old c7hsa plug so i replaced with cr7hix irridium plug and solved the problem. I havn't started bike for at least a month now due to bad weather/work etc. Went to ride it the other day and bike was really hard to start, once running it was idling really rough...
  14. AntNZ

    Jetting/spark plug?

    So my bike was running sweet then started running like s#*t. Sourced the problem, spark plug buggered. Decided to get cr7hix irridium plugs instead of c7hsa. I have put new plug in and now bike starts first kick every time with choke and no throttle, once warm it idles perfect with choke off...
  15. AntNZ

    New minibike track...Started! :)

    At last, I made a start on my new track today :) Photos aren't the best, will get some shots from the air in a few weeks when my mate with a helicopter comes back from flying overseas. It is just a start, will take at least a year to cart all the extra soil/gravel for the jumps and berms...
  16. AntNZ

    lxr 14 nitro circus/daytona 150

    So i found a lxr 14 NC with daytona 150 engine, is a 2012 model and shop display so has only been started a few times. Shop says they have spent $4000 on this bike ( apparently). $2500 nzd, sounds too good to be true. Just waiting for a few answers to questions i have asked them. What is...
  17. AntNZ

    Thumpstar pitbikes?

    Hi, anyone know much about thumpstar pitbikes? i know they went bust for a while because of cheap copies and copyright infringements but most info i can find suggest they are reasonably good quality. The new TS-R 2016 model looks pretty good for the price $2000 NZD. Here in NZ they come...
  18. AntNZ

    CR7HIX Irridium plug

    Might be silly question butttt....When changing from standard C7HSA plug to the CR7HIX irridium plug, How much will this affect jetting?
  19. AntNZ

    Forza pitbikes???

    Hi, anyone here ever heard of FORZA pitbikes. I would like to get another lxr but cant get one anywhere here in NZ newer than 2012. These forza pitbikes look like almost japanese quality, strongest looking frames i have seen, DNM rear shock, fastace fully adj front forks. Dont know much bout...
  20. AntNZ

    too lean or not too lean?

    Hi, i have finally got my z155/160ho stock engine running good, ended up with 39pilot and 105 main, clip in middle position, I think it might still be running bit lean but not too sure. Have attached photos of plug after a chop. Please advise..Thanks
Back
Top