Search results

Ok cheers on being invited to the VIP section Just curious if anything will be getting done about the server? I frequent about 5 forums and this is the only one I ever have access issues with and of late it works 1 in 2 times (so like 50%) I think if your looking to get the forum back on...

Ok after a recent off where my throttle housing got smashed I replaced it with a billet throttle that is a 1/4 turn. While this is much better quality and then my stock pitpro throttle I'm not a fan of the whole 1/4 turn as it was making it that little bit harder to get back on the throttle...

Ok putting this up now to let you all know. Now it is not 100% certain now but there are certainly wheels in motion from what I have been told and should hopefully just be a matter of time until its open to us. Track is Lakeside Raceway (presume its the kart track, its the smaller one on the...

Ok as most of you would have realized Squeeby, No_crf50_here and myself try get some footage of motards when we can. Now as we don't all have super expensive cameras the quality of footage isn't always the best in the world but its good enough in most cases but what have others done to get good...

Ok basically the title explains it all, this is the place to post any pictures and videos that you may have taken or found. I was at the Archerfield round for the morning practice 22nd March and brought a camera man along for the ride, there was also a few others with camera's that I saw so...

Ok, figured we needed a topic to discus what you do different when setting up your suspension for minimotard. Now still being fairly new to the whole minimotard scene myself have not really had a chance to try out different setups. However I am currently changing the oil in my forks and...

Ok was scanning over Ebay and came across this New 2008 Super Strong Double Piped Chromolly Extended Long CRADLE Frame Fit with Single Swing Arm Only now i'm not in need of a new frame but it does really look the goods from what i can tell. Figured someone would be asking...

Ok was bored as hell the other day and had pitbike and tools handy so had a bit of a play. Removed exhaust and cleaned up the weld inside for better flow and figured i might aswel check out the intake while I was there. What I found was not real good. Bike is a 2008 pitpro 140XR with the...

So we went and played silly people at the track at Archerfield, was first time for all of us but we all had a ball. There were several people out taking photo's and video so as we receive them they will get thrown up in here. If you have any feel free to add them yourselves or you can email...

Got a billet style oil cooler and want to keep your engine running that bit cooler? The easiest solution is a more efficient oil cooler, most commonly a radiator style oil cooler. Don't forget tho that the oil cooler can be fed from either the crankcase or the head so make sure you get one to...

Don't have much dirt where you ride? wanna try out mini motard? you need a set of these ! They are a motard wheel set to suit pit bikes. What you will expect to get from most sellers in the package is 1 x complete front wheel (bearings, hub, spokes, rim, tube, tyre) 1 x complete rear...

Ok so everytime you crash on the right hand side of your bike the rear brake lever gets mangled and is a pain in the bum. Catch 22 is for dirt riding you normally use your rear brake more so you need a lever there and you need it to work even after you have had an off. Whats the solution...

ok here goes Product : Pro Taper Tucker Rocky SE Handle Bars Part Number : 02-5280 Bend : Honda Mini Color : Platinum Grey Width : 730mm Rise : 117mm Sweep : 50mm • Made with ProTaper AS20™ aerospace aluminum • Scratch and peel-proof“un-sticker” graphics • Knurled clutch side for...

OK this is a question I had bouncing around my head. Can you back in a mini motard? I ride a full size motard and half the fun of riding it is sliding it into the corners. From what I can tell it should be possible to back in a mini motard but I am yet to see a video of anyone doing so. Now I...

Ok this is half chasing some help and half just a place to vent because I had hoped they would just bolt straight up...... I got me one of these flash 6 piston brake kit for my pitty Now in the pics these look great but in the flesh the calipers are surprisingly small and the pads look...

Ok so its the new craze and a couple of people here are getting them setup so lets all go ride them. What is it Minimotard practice session at Archerfield Brisbane (I believe they also run pocketbike at the same time so come along with one of them if you have it) Where is it The old...

Ok I have a DHZ minimotard wheelset 12" x 2.15 with kenda 90/90-12 motard tyres now the problem is I can't seem to get the tyres to seat on the rims properly. Like fit them all up and all that rubbish but when I inflate the tubes they won't push the tyre onto the bead correctly and part of...

So you have been asking for it so here it is. A how to bleed your brakes. YouTube - Pitbike brake bleeding This is my first attempt at a how to video and was done off the top of my head so forgive me for the mistakes as it was all done in 1 take. I say a few wrong things in places and...

Hi, in this tutorial I will be taking you threw the steps of how to make your own supermoto peg sliders for your pitbike. These are a budget option that I will be talking about and if you already have the tools should cost you under $2 a pair in materials. So what you will need - your pegs...

ok, basically just wanting to know if you can get one of these Zip Ty Racing to suit the mikuni 26mm clone carbies. So are there any available off the shelf? "They feature a knurled forend for easy grip, anodizing for longevity, and laser etching for adjustment accuracy. The Zip-Ty Racing...