Search results

ITEM AND CONDITION: 2008 motovert rx160 used but built with goodies PRICE, PAYMENT METHODS AND TERMS OF SALE: 1300 REASON FOR SELLING: coz it needs to go EXTRA INFO: 007 motovert rx125 with a yx160 conversion i bought the bike completly stock and decided to go from top to bottom and...

hey alls recently picked up this motovert rx from a dude in nsw for a wicked price and once the cash had been transfered... it was pretty much loaded in a mates double doing a melb to syd truck run apon arrival i noticed that the sellers desripton wasnt exactly spot on lol -rear dnm was...

hey all im trying to replace the rear brake line and master as they were cactus when i purchased the bike now ive bought a 510mm line with 10mm banjo fittings and its way to long im struggling to find a shorter line on ebay or infact any wnere losing my **** as this bike is so much of...

WANTED:full exhaust to suit stock 125cc motor crf type pipe CONDITION: new or very good nick PREFERRED PRICE RANGE: depends LOCATION: victoria prefer but will pay postage on right deal EXTRA INFORMATION: needs to be a crf50 type pipe and needs to be aftermarket can CONTACt: pm me...

hey peoples just picked up a motovert rx as a little street killer project wanting to find out if there is still members who own and ride the mvrx ill post some pics of mine tommoz

WANTED:motard rims 12" with 15mm axle have to be bigger than 1.85 wide billet hubs and spokes prefered CONDITION:new used 9aslong as there not screwed PREFERRED PRICE RANGE:depends what you have :) LOCATION:pref vic but will pay for postage EXTRA INFORMATION: need for a upcoming...

hey peoples and mx :P i have been testing the yx 160 out and have hit a problem which is causing a slipping feeling in 3rd and 4th but i just didnt feel right i just pulled the clutch cover casing off and disassembled the clutch face hat and im not shore if this is the way its ment to be...

ITEM AND CONDITION: 28mm OKO d-slide carb bought brand new and used for 1 start up but going vm26 PRICE, PAYMENT METHODS AND TERMS OF SALE: $60ono REASON FOR SELLING: got a vm26 and an oko 26mm for my bike EXTRA INFO: new appart from 1 start up LOCATION AND CONTACT...

hey all recently just installed a doner yx160 into my tard just to get it moving and im having the follouing problems once i install the cable and screw adjuster on engine to the min it seem to pull and engage clutch as if i were pulling it ive just bought a longer 110cm cable with 14cm...

hey alls im wanting to increase the cc of a spare 160 yx motor to above 200cc and wondering who and were in melbourne can i get it done any help would be great and appart from tb who else does a large kit with everything needed? regards

WANTED: pitsterpro X4R top engine moutn plates and left and right tank to fairing shroud brackets CONDITION: must be mint to good condition PREFERRED PRICE RANGE: let me kow what you have or know of and we can go from there LOCATION: worldwide lol EXTRA INFORMATION: please help a...

hey peoples ive come to that part of my build were i need a full exhasut from header to muffler i love the yoshimura setus that dhz sell but am unsure if they will fit with my crf70 type dhz outlaw frame my setup is just a gpx yx160 motor and need help in finding out what fits with my frame...

WANTED: SEMICIRCULAR KEY 4×12.5 for stator side of crank to secure flywheel(magnet from irk so it doesnt spin CONDITION: dont care as long as it fits PREFERRED PRICE RANGE: you tell me LOCATION: anywere ill pay for postage or pick up EXTRA INFORMATION: P{LEASE HELP ME...

hey all looking at buying a pitty in tassie and need help getting the bike to melbourne spirit of tassie are useless and cant give me a straight answer as i dont wanna book a room and live it up lol cash involved

hey peoples just scored a genuine vm26 running the following jets main:190 pilot:22.5 ill be installing it on a gpx yx160 out of a pitsterpro only mods on engine are inner rotor kit and big bore exhaust what do people suggest for a good jetting? never buggered around with jetting before regards

hey u z boys just got a fresh shipment from mate in ajapn of these puppys seen these before? noval sized mags dedicated to z's and the custom scene in japan

WANTED: full system for my crf70 outlaw build to fit dhz crf70 frame and yx CONDITION: new or used PREFERRED PRICE RANGE: you tell me what you have and ill tell you if your dreaming :) LOCATION: im in melbourne but will pay to ship EXTRA INFORMATION:im after ether pro...

ITEM AND CONDITION: PITSTER PRO SUPERMOTO WHEEL SET complete with bearings,brand new gpx 190mm disk and 4 disk bolts PRICE, PAYMENT METHODS AND TERMS OF SALE: $150 REASON FOR SELLING: got a set of excel rims cheap EXTRA INFO: 2.50" front rim 2.75" rear rim brand new gpx...

hey all picked up a complete yx160 today in immac condition but the stator has been removed by previous owner my problem is what i should run this motor is purely going to be used for motard ive used a yx160 with irk and loved the snappyness but want people advice and ideas on whats...

hey tech peoples has anyone used or heard anything on these coils? they look the goods and im considering running it since its ranked best on webike japan im chopping up on ether this or the taki hypercoil(and no money isnt an issue) http://japan.webike.net/products/1331413.html let...