Search results

hey mate go on ebay the china brake kits will fit your bike and so do the brake pedals which you can get from any where you can order a brake pedals from honda just ask for a crf50 pedal but for disk brake rear end

look i dont mean to be rude but why did your dad take the bolt out for and if your going to be maintaining or pulling down your own motor id get a second hand old engine to pull down and learn on first cos thing missing or in the wrong way or wrong size and you have and over sized paper wight...

sounds like an air leak in the manifold,caby and engine just check the bolts first

if you dont no whats going on and you need a forum to find out what a bolt dose id say take your bike to a mechanic before you or your dad stuff it up

where abouts at the island do you ride iv got a caravan at san remo holiday park pm me and we should go for a ride some time

why did you pull it apart??? side to side is fine as it dose need some movement in it

stick it in 5th gear and try push it not 1st lol

motovertman ill help if ya need it im in the S/E subs out at hampton park and might be able to get my hands on a bobcat or dingo my mate has them

i no its an old thread but i have got stuff off them it may take up to 2 weeks but they are very good and they no there stuff so if you ever need to no anything about the combo your running of want to run just ask them if it will work and they will hook you up with a good deal

the backfiring may be an air leak in between to carb and manifold or manifold and engine just check that and use 98RON fuel

take off the air filter and give it a try now just a quick ride you dont want to get anything in there with no filter on if thats the prob go get a uni filter it with cost you $25 - $30 from any moto shop

you need to no the stroke of the crank on you 125 is it 55.5mm 57mm i think most 140cc crake stokes are 57mm and 59mm i no the xy140cc is 57mm so if you were to use an xy140cc bore your piston with sit to far in the bore and thats no good for you comp just buy a bigbore kit off ebay i have 1...

i found a pic of the provert pedal if that helps

hey guys iv been looking for a rear brake pedal for a mojo provert and havnt had any luck dose anyone no where to get one iv try the cnc ones on ebay but there different the only thing i can find that looks like it would fit is this one off an orion twin spar frame

hi dose anyone out in the mini world no of anyone that makes custom copper of alloy head gaskets as i need to reduce the size of the oil feed hole on the bottom left stud hole as mine is to big and lets oil into my 61mm bore

sounds to me that you need to do up the spark plug as there also come loose and therefore loose compression as i said check ALL BOLTS ON THE MOTOR and go from there and also check all the wires on the coil and cdi are tight

you may have an air leak in between the manifold and engine or manifold and carby make sure you check all bolts on these bikes as they do come loose from time to time try that and see if it fixs it if not it maybe your timing but for now just do a basic check on all bolts

i already have a 0.5 alloy one will the copper be much better and what thickness gasket should i get it has a HC piston 7mm dome i think by the way im using this on a yx 140 so would this make it a 160cc or 166cc???

just copy and past this address into google maps National Dr, Dandenong South VIC 3975 its the bunch of trees on the right of the page ill be there around 12ish

ok i worked it out to be the head gasket i made a paper one which fix the problem for like 5mins then smoke again so where would i get a copper gasket from oh and the 61mm piston is 00.2 of nothing heavier than stock and i do have a fully ported head 27/23 valves and 6.3mm cam