190fdx

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. my67xr

    Daytona 190 Performance parts, new releases etc

    I thought i'd start a thread to show some of the new stuff that has come out for the Daytona 190's There are now 3x Daytona 190's available, the 190FDX, THE 190 FLX, and the Daytona FD The FLX and FD both have lighting coils installed. The new FD engine has a road based gearbox, 1 down 3...
  2. my67xr

    Daytona 190 FLX, now with lighting/charge coil

    i was just browsing the net and found this version of the Daytona 190, the FLX looks like it's got a lighting coil now to suit road ridden bikes Daytona Anima 190cc FLX Engine they sell the Daytona needle for the PE28 if anyone is having trouble finding one 46-JFQ NEEDLE
  3. rumble

    Anima 150fdx not living up to expectations.

    Have a stock 150 and find it possibly slower than a z160. Looking to get more mid to high power. Currently before it rev limits, the valves start floating, so new valve springs? Carb is an oko 26. Jetted pretty good, happy with how it feels. Have a oko 28 on the z160 so have a bit of...
  4. rotn50

    Daytona Anima 150f rev limiter and ignition timing settings?

    So I did some reading of the 150f anima engine manual and came to the section where you have the different settings of the ignition timing and rev limiter, To those that are running these motors or those that have some insight or knowledge of this im wondering if you have heard what settings...
  5. rotn50

    150f/190fdx head bolts torque

    Hey peeps, I did a little searching on google but came up with a few dead ends and my short attention span led me to just ask the question, What is the head tension on the 150f/190fdx donks, I presume the 150 and 190 would be the same tension. Thanks in advance lads.
  6. rotn50

    rotn daytona 150f 4v

    Well most would know i purchased Nicks(nickv1980) Daytona 150f 4v and after a few pays and the wait on delivery the big girl has landed. This motor is heavier than any donk i have lifted and you can tell it is all in the build and the internals to cope with the extra power, she is a thing of...
Back
Top