Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

  1. MarCon

    A quad for Xmas, Number 2 (pic heavy)

    Hi all, Ok,I thought I would put up some pics and info on the second quad being done as an xmas present for one of my other nieces. Backstory. This one is being done for a 10 year old girl. She has a moderate physical disability in the form of muscular distrophy. For a long time this...
  2. MarCon

    A quad for Xmas, Number 1 (pic heavy)

    Hi all, I know most of the traffic on here is bike related but I'm kinda fond of my quads. So just to add something for the other quad readers I thought I would put up a quick run through of one of the quads that this santa's helper had to get ready for a Xmas delivery. So some time ago I...
  3. LEO DPRO 037

    Pitsterpro X3R

    Here are some pics of my new bike. Paid $350 as is. I plan on transplanting my new z160ho and oko 26 out of the dpro and onto this frame. Put my wheels and bars over etc. And return it to its former glory.
  4. 559fiddys

    upc xsi pro fork help

    Hey guys I need a little info if you have it. I need to rebuild my forks but I don't know what they are so therefore I don't know where to look for parts. Upc xsi pro is the bike they are on. Any info would be awesome thanks guys.
  5. ash.onmtb

    mechanic to rebuild z50 motor SE Melbs

    As title states, looking for a reputable mechanic/engine shop to rebuild a z50 motor back to being as reliable as the factory made it, with maybe a sniff of performance (as who can really stand to tear something apart and rebuild it without improving it...) Chasing rock solid reliability, and...
  6. my67xr

    Got rust ? Here's a DIY sand blasting set up i use

    i thought i'd make a thread for Sand/Media Blasting. you need a basic sand blaster kit, and a compressor (minimum 10 cfm), air line, sand, something like this- You will need some good protective eye wear, safety glasses at the minimum, but you're best off using enclosed goggles, a...
  7. turkey

    Maintenance on a Big bike and pricing

    I had been wondering for a while on 2 strokes and 4 strokes Few questions are 2 strokes and 4 strokes - How often do you need to change the oil - How often do you need to give it a top end rebuild - How often do you need to give it a bottom end rebuild And how much do mechanics...
  8. xLOCOx

    Loco's Ciniworx cxf build....

    Hey guys and girls... I would like to say a massive thanks to coolmoddee for bringing the bike up!!!! Now... To inspect this rig...... I've already take the old chain off.. And the old kill switch.. Here's the new kill switch... Its a billet RHK one...
  9. velociraptor

    1999 Suzuki DS80X

    Built up engines for someone who liked to abuse the hell out of em and ended up doing a lot of repair work for him(crashing, ovverevving in 1st, low oil or no oil in gas, list goes on) in the end he had bought a badly beaten up. Ds80 for 800 dollars not running no fenders no airbox bent forks...
  10. my67xr

    my 1982 Suzuki JR50, Rusty restoration

    the other week when i picked up the Jianshe Coyote PY80 it actually come with another bike. i picked up the pair of them for $220 this is the other rusty bike, a 1982 Suzuki JR50. i thought if i fix this one up it would give Cj an opportunity to lean to use a footbrake, and that it'd also be...
  11. zwebx

    My 2002 WR426 Project (In bits)

    Okay bought this wr off ebay For $650
  12. H

    Build/Restoration of my crf50.

    hey, so this is my build post, its a on going process and got a fair bita work to do, the bike was originally a 2006 crf50 ( at one stage of its life ) they was heavily modded, then was sold onto someone else who well for better lack of works didnt treat it quite well.. so i bought it back and...
  13. Q

    Yamaha 1993 DT175 Jetting??

    Bought a 1993 DT175 for $500, it runs and it rides (rough) so I figure not a bad deal. Most of the important bits are there and working its just that everything needs some TLC. I plan on doing a full strip (minus bottom end if I can help it) and rebuilding it right At the moment i'm tackling...
  14. R

    Yamaha GT80

    Not sure if I got the right area or not, apologies if I haven't. Wife finally convinced her parents to give us her old bike from when she was a kid. It's an old 1974 Yamaha GT80. Not running. Know there's a piston issue and one of the bolts holding the carby (I think{it's the part over the...
  15. S

    PitPro 150 bigfoot build/dismantle

    Well I did it again. Picked up another bike cause I wanted to get a 150...So I got this. Was pretty damn cheap at $300, has a DNM rear shock fully adjustable and rebound adjustable forks. 150yx and pretty clean generally. Needs a new seat and new rear fender besides that its just a bit of...
  16. D

    Is this cylinder wall okay?

    Hi guys, I think this is in the right section, please excuse if it's not. I'm still learning the ropes and I wasn't sure if this amount of scoring is something to be worried about? I'm kinda getting the worst of it in these pics, everywhere else seems quite nice in comparison. the crap...
  17. lets ride

    88 kit

    hi all im building a z 50 and looking at doing a 88cc with v2 head can anyone tell me how it will go riding it on the street and looking at putting in a 4th gear thanks
  18. GooseMan

    Mighty RV90 Resto

    Just doin a quick recondition of my rv90. I need a rear mud guard, anybody know where I can get one? Hers some pics And a current pic of where its at hanging from my new best freind:beerchug:
  19. GooseMan

    Goosey's DS80 Build

    Hi everyone, here is my DS80 Build or maybe more like a rebuild I guess, anyway here is what I have done: ***8226; Replaced bottom end bearings ***8226; Did some port work on it ***8226; Stripped the frame down to nothing and repainted most of the bike ***8226; Greased all bearings ***8226...
  20. C

    carby rebuild help

    hello , i have a 125cc 4stroke pit bike which was running fine but then i left it for years and never started it. I was going to take it out this weekend and i decided to do a full carby rebuild and clean beforehand. I have never done it before and was interested to learn how it all works and...