z160ho

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. android90

    Motovert rx z160HO exhaust help

    Hey guys Im back haha , top end of my Lifan 150 is stuffed and the bottom end is too so I got a z160ho from DHZ , now I am after peoples opinions of best exhaust for this engine but keep in mind it will be in a road legal pitbike so dont want to get defected all the time and have to take it in...
  2. Stubsy

    Stubsy LXR!!!!

    A friend picked up my new bike today. Still needing to get it transported up but ill sort that out tomorrow. Pretty stoked!! :clap: 2011 LXR, z160ho with a v2 head. Here is a quick pic in my mates garage.I'll post more when it arrives. Definitely coming down brissie way for a ride in the new...
  3. my67xr

    Eliminating side play in your shift drum ZS155 shown, but should work on most horizontal engines

    http://www.youtube.com/watch?v=ILvFDhWWdFE
  4. Chops

    My modified madass!

    Thought I would put up build thread of my Sachs Madass, they share a few similarities to mini bikes. I have been reading alot of stuff on here lately, in anticipation of a future engine upgrade. Here it is the day i picked it up. I pretty much ordered a tune up kit straight away with egr...
  5. S

    Opinions on CDI and Coil

    Looking for your guys opinions and performance gain on and SSR 125SR i was reading thru >>>Performance upgrades guidelines: Stage I-III<<< and it says to switch CDI to a race one but which one ,any preferences on which is better then the other one and for the coils same thing , im trying to use...
  6. F

    Zongshen 155z ho big problem

    Hi all,I have been on here ages ago asking probs with my engine,well 1 year later I'm still having it. To start with the motor didn't run right as it came with a Mollt carb,got a oko 26mm flat side and it still didn't run right,when I say didn't run right........basically spits fuel out of the...
  7. C

    Custom 10" Z160ho Dirt Build

    Hey guys, I've been floating around for a few months now, finially got decent internet so I thought Id start a build thread. I have a 09 yz250f for mx but I was after somthing to muck around with mates and for the Ms to ride. I've got a mate with a 50 track in his back yard, and hes got...
  8. DHZ_XR8cing

    Info on 155z auto decomp cam

    Good Evening all. I have a quick question. The 155z has a auto de-comp cam. Is this correct? If so is it a possibility that this play's up and stays on when the bike is running?
  9. D

    Z160HO Clutch Issues

    Hey Fellas, Just picked up a second hand DHZ dpro 160 for the missus to learn on (shes not allowed on the big bike) and for me to have a bit of a play with. Its a decent little bike with a great engine, heaps of go in it I was fairly surprised when I first jumped on. The problem we are having...
  10. littlerider9

    zongshen 160

    has anyone got a spec list for the zongshen 160 that comes in the revolution mxs?
  11. pitsterprobrendan

    boyesen ignition cover

    howdy guys just looking for a boyesen ignition cover to fit my 160 pitsterpro any one got any links
  12. killa pitpro

    kitaco inner rotor kit

    would a kitaco inner rotor kit fit in a pitsterpro 155z engine?
  13. A

    Better CDI/Coil but which one?

    So I have the 09 PitPro 140XR, Changed out the spark plug to a good NGK one, but am looking to upgrade the CDI/Coil lead aswell as get an inner rotor kit. There is so many to choose from.. but the question is which is the best?? Some friends run a "SpitFire" car lead... but dont know...
  14. 1

    Ignition coil advice ?

    hey peeps i have just put a new racing cdi on my bike and have been doing a bit of research and i hear that a better coil can compliment your cdi making a bit of a differnce in preformance but i im a bit of a kook when it comes to the mechanics side of my bike can are coils a standrad fit thing...
  15. U

    Irk, ork, cdi, tdc, coil!?!?!?!

    Hey! I have a IRK (Inner Rotor Kit) fitted on my 140 Linfan engine. I use the bike for motarding so the IRK should be the bees knee! It have been running fine (I think!) I don't know how to adjust correctly so have just adjusted it until it started easy and ran sorta okay! It now seems that...
  16. j32x

    Monster Coil CRF50

    Hi All I couldn't find any info on this so I hope somone knows or has tried this before. I have a CRF50 with 88 kit and have noticed that my throttle response is not the greatest. It somtimes is smooth and then other times it cuts in and out when i really give it to it. I have a Takegawa cdi...
  17. steve101

    75cc kit for crf

    hey guys just got my 09 and wanted just that little bit more power dont want an 88 kit just want that touch more pull up hills and stuff so has any body had any experience with these kits the kitaco one and would i need clutch springs and with the stock pipe will it still sound like a stocker...
  18. M

    Kitaco or.....

    those blue hi rev cdi's you see on ebay. they seem like they both do the same job and at the same performance. what do u guys think. they both plug into most pit bikes in the chinese market. opinions people. i like to see what you guys think. lets create a discussion! :cool: peace
  19. pitproxr

    kitaco clone irk

    hey im lookin at some irk's and found this one on ebay for $99 KITACO CLONE INNER ROTOR 4 PIECE KIT 4 pitbike - eBay Other Makes, Bikes, Motorcycle Parts, Cars, Bikes, Boats. (end time 11-Dec-07 09:32:45 AEDST) tellus what you think and if its trustworthy cos its a copy
  20. N

    Kitaco Coil and Cdi

    i just ordered a kitaco supercoil the other day and hopefully it will fix my cutting out in high rpm but if thats not the problem then my cdi tht came with my irk is rooted so will any high rev cdi work with the irk aslong as i have a cdi harness to fit the irk? thanks
Back
Top