150f/190fdx head bolts torque

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rotn50

Master Spanner Spinning Moderator
Joined
Oct 9, 2008
Messages
4,930
Reaction score
46
Location
Qld
Hey peeps, I did a little searching on google but came up with a few dead ends and my short attention span led me to just ask the question, What is the head tension on the 150f/190fdx donks, I presume the 150 and 190 would be the same tension. Thanks in advance lads.
 
I've finally got some info on this!!

Found that most guys are using standard torque tables for head nuts: 8mm is 15ft/lbs (20.3 Nm) with clean dry threads.

Now I can finally install my de-comp cam to the 150!! Yay :bolt:
 
I've finally got some info on this!!

Found that most guys are using standard torque tables for head nuts: 8mm is 15ft/lbs (20.3 Nm) with clean dry threads.

Now I can finally install my de-comp cam to the 150!! Yay :bolt:

Dont crack the head bolts to change the cam, learn from my mistakes lol
 

Latest posts

Back
Top