Carby / Jetting settings for your bike.

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

thump*140

Mini Riders Legend
Joined
Aug 20, 2008
Messages
2,832
Reaction score
63
Location
adelaide
Ok Kiddies, Uncle Thump had an idea. probably a bad one, but it might help out with some of the carby questions that will always plague minis...
My idea is thus.
Using the template below, and the "ADVANCED REPLY" option, fill out all the details ON YOUR SPECIFIC BIKE, and please list your BIKE MODEL, and CARBY TYPE in the heading, so that searches will bring this thread up easily.
List engine size, carby type, carby diameter, Jetting specs, and type of jets used, eg Keihin or Mikuni style, engine specs ie: standard or modified, and if it's modified, WHAT modifications have you done, and the area in which you live.
(we want exact I/D's on carbies, not "it's a qenuine fake mikuni 30mm")
The idea is that others with carby issues, or looking to upgrade carbies, can look through here, find a similar set-up to what you have THAT IS RUNNING PROPERLY, and can use your settings as a base guide to set up their bike. The idea of having where you live, will allow some idea for different altitudes as well. (cheers Dready, good idea mate!)
REMEMBER WHAT WORKS FOR ONE BIKE, MAY NOT WORK FOR ANOTHER, HENCE THE REASON FOR ACCURATE DETAILS.
This thread will only have specs of riders bikes. any questions you have, for members with setups similar to yours, PM them if you have queries, or post in techmasters. Any non-relevant or off topic posts will be deleted, we want to keep this thread as relevant and on-topic as possible.
Thanks guys, and please, those of you with accurate details, and well-jetted bikes, please add to this thread!!
 
Last edited:
TEMPLATE:

Bike model:

Engine Model and capacity:

Engine Spec - stock or modified - list mods:

Carby model and Internal Diameter:

Jetting specs and Jet Type used (Keihin or Mikuni) :

Area you live, and general altitude (sea level, desert, highlands etc):
 
Last edited:
Full custom, LIFAN 140, 28mm OKO FLATSLIDE

I'll start things off. hope it helps peoples. :)

Bike model: Full Custom ground up build. DHZ Monster twin tube trellis Frame.

Engine Model and capacity: LIFAN 140 all up start in gear. 1JP55FMJ

Engine Spec - stock or modified - list mods: Modified: IRK, 32mm H-bomb pipe, 7mm lift cam, manifolds port matched, head ported.

Carby model and Internal Diameter: 28mm OKO Flatslide.

Jetting specs used: #36 Pilot jet. #102 Main Jet. Stock needle, 2nd clip from the bottom

Area you live, and general altitude (sea level, desert, highlands etc): RADelaide, SA.
Just above sea level.
 
2008 Atomik Blitz 26mm OKO Flatslide

Bike model:2008 Atomik Blitz 250

Engine Model and capacity: Loncin Gen III w/cooled 250

Engine Spec - stock or modified - list mods: modified - revbox, muffler cut down by 125mm, airbox removed, using pod filter, header pipe ported

Carby model and Internal Diameter: OKO 26mm Flatslide

Jetting specs used: #36 pilot jet, #97.5 main jet, needle on middle clip

Area you live, and general altitude (sea level, desert, highlands etc): RADelaide, just above sea level
 
04 Thumpstar Hunge-ten reframed

Bike model: 04 Genuine Thumpstar Hungeten, reframed into 05 Orion 125 frame.

Engine Model and capacity: FYM 110 2v. (original Hungeten motor, 3spd all up)

Engine Spec - stock or modified - list mods: Stock, rev box, 30mm exhaust

Carby model and Internal Diameter: Ebay Fake Mikuni, 26mm I/D

Jetting specs used: #20 pilot, #95 Main jet, Needle second groove from the top

Area you live, and general altitude (sea level, desert, highlands etc): RADelaide, close to sea level.
 
LEI/ATOMIK QUAD 250 30mm Fake Mikuni pumper

Bike model: 2008 Atomik Quad

Engine Model and capacity: Zongshen Gen 1 250cc upright, reverse down & 4-up

Engine Spec - stock or modified - list mods: Stock, rev box.

Carby model and Internal Diameter: 30mm Fake Mikuni pumper

Jetting specs used: #24 pilot, #97 main, needle on 2nd groove from bottom

Area you live, and general altitude (sea level, desert, highlands etc): RADelaide near sea level
 
05 orion/atomik 125 semi auto

Bike model: 05 Orion/Atomik 125

Engine Model and capacity: E-start Ducar 125cc semi-auto 4-spd all down

Engine Spec - stock or modified - list mods: stock.

Carby model and Internal Diameter: Ebay Fake Mikuni 24mm oval bore

Jetting specs used: #20 pilot jet, #92 main jet, needle on middle clip

Area you live, and general altitude (sea level, desert, highlands etc): RADelaide near sea level
 
Bike model: 09 atomik nitrous

Engine Model and capacity: 150cc yx 150 daytona style

Engine Spec - stock or modified - list mods: very light port matching and head clean

Carby model and Internal Diameter: molkt vm24 copy
Jetting specs used: #20 pilot jet(?)no markings, #102 main jet, needle second clip from bottom.
Area you live, and general altitude (sea level, desert, highlands etc): southeast melbourne.
 
Last edited:
Bike model: Tdr Klx syle.

Engine Model and capacity:Lifan 140cc

Engine Spec - stock or modified - list mods: Slightly modded with a hydraulic clutch
Big bore 32mm pipe

Carby model and Internal Diameter: OKO 26mm flatside carby.

Jetting specs and Jet Type used (Keihin or Mikuni) : 97/36

Area you live, and general altitude
about 15m above sea level
 
Bike model:08 dhz monster

Engine Model and capacity: lifan 150cc (daytona style casing)

Engine Spec - stock or modified - list mods: stock (ORK)

Carby model and Internal Diameter: OKO flatslide 26mm

Jetting specs and Jet Type used (Keihin or Mikuni) : k40 pilot and k97 main (keihin) and needle on 2nd notch from bottom

Area you live, and general altitude (sea level, desert, highlands etc): central coast N.S.W just above sea level
 
Bike model: PP140XR

Engine Model and capacity: Lifan 140,

Engine Spec - stock or modified - list mods: lightweight slinger/flywheel.... so basically stock when it comes to jetting comparison

Carby model and Internal Diameter: OKO 26mm Flatslide

Jetting specs and Jet Type used (Keihin or Mikuni) : Keihin 36 / 96 but 98 works pretty good too, needle clip one clip down

Area you live, and general altitude (sea level, desert, highlands etc): melbourne western suburbs
 
Last edited:
Bike model: DHZ K1
Engine Model and capacity: 155z

Engine Spec - stock or modified - Stock.

Carby model and Internal Diameter: OKO 26mm Flatslide

Jetting specs and Jet Type used (Keihin or Mikuni) : Keihin 36 / 100

Area you live, and general altitude (sea level, desert, highlands etc): East Coast australia near sydney sea level.
 
Bike model: home build

Engine Model and capacity: zonger 125cc

Engine Spec - stock or modified - list mods: modified, akunar g2 cam, akunar HD valve springs, stainless steel vavles, ported head with 26mm intake

Carby model and Internal Diameter: fake 26mm mikuni, so 22mm rly

Jetting specs and Jet Type used (Keihin or Mikuni) : mikuni, 15,92.5 needle on bottom clip

Area you live, and general altitude (sea level, desert, highlands etc): brisbane north side
 
china boy sounds like you need to richen out your jets, basically if needle clip is all the way you need to go bigger, needle should sit in the middle 3 grooves
 
yer should go smaller should go 12.5 but owell. i like how it feels plus when did spark plug reading, it was pretty much spot on,
 
yeh if it goes good then w/e It's just a rule of thumb kinda thing. oh and richen = bigger jets
 
yeah china i think you'll find a 12.5 way too lean on the pilot... 20 would be closer i reckon....

Hmm... seems like we can see a bit of a pattern forming on jetting, especially with the OKO 26mm's...
seems everyone is running 36 or 37 pilots, and 96-100 mains...
 
Bike model: Mikilon D8-125 (Miniblitz)

Engine Model and capacity: Zongshen 125 start in neutral only

Engine Spec - stock or modified - list mods: Stock

Carby model and Internal Diameter: OKO 21mm Flatslide

Jetting specs and Jet Type used (Keihin or Mikuni) : #k35 pilot, #k92 main, JJH needle on middle clip.

Area you live, and general altitude (sea level, desert, highlands etc): rAdelaide.

Ps: Bump.
 
Bike model: Home built looking thing

Engine Model and capacity: Lifan 110

Engine Spec - stock or modified - list mods: Stoko

Carby model and Internal Diameter: Mikuni 22mm

Jetting specs and Jet Type used (Keihin or Mikuni) : M95 main, Pilot?? Doesn't have marking on top of it.

Area you live, and general altitude (sea level, desert, highlands etc): Out west, Vally, Dry.
 

Latest posts

Back
Top