Coil help!!

[Emilio]

Hey everyone I have have a coil on the bike arm and wanted to swap it over to another on, but the connections are different to each other, just wondering if I can get some tips on what to do and yea! Thanks I have this one on now and want to swap it to this one!

 

[Emilio]

want to change it to this!

 

[my67xr]

just run an earth wire from the coil mounting point to the green terminal,
and your positive wire (black w/yellow striped wire) from the loom to the coils' black terminal

 

[Emilio]

How do I know the earth wire? Is that the green one with the ring around it?

 

[my67xr]

make one yourself.
do you have automotive crimp terminals ?
you need a short length of insulated copper core wire (maybe 60mm long) with a 6mm ring terminal on one end, and a female spade terminal on the other
pretty basic like this-

 

[Emilio]

I'll post some photos tomorrow when I get to it, do I Ned to earth it with that? I thought black yellow one unplug and the green wire I'll pit the spade on the plug it in? I'll post photos tomorrow

 

[my67xr]

yeah that will work,
but just make sure there is a green wire from your loom earthed out to bare metal on the frame.