DHZ 2015 CRF110 STYLE 160Lr linkage spec

[pitsterproAUS]

new design outlawLR 160 and 190cc dhz bike below

the gemomitry of this bike is same as the lxr pitster pro , same forks same shock , same linkge ect

notice on a lot the poxy bikes out there the rear mud guards stick up pointing to the sky , not this bike , when getting on the throttle out of a corner the rear end sits down and hooks up really well ,

$2000 free shipping to capital city's

 

[my67xr]

ENGINE SPECIFICATION
Engine Brand: Zongshen
Engine Type: 4 Stroke - SOHC - Single Cylinder - Oil Cooled
Engine Model: ZS1P60YMJ
Cooling System: Twin Oil Cooling System
Compression: 11.5:1
Bore/Stroke: 60mm x 55mm
Maximum Output KW/HP: 10.5kw / 9500 rpm
Maximum Power / Rotating Speed: 11n.m / 8000rpm
Front/Rear Sprocket Tooth Count: 15/41T 420pitch
Starting System: Kick Start
Clutch Type: Multi Wet Clutch Plate
Transmission: 4 SPEED Manual - N1234 (4Up), Start in Any Gear
Gear Ratio: Primary Reduction: 2.62
i1/i2/i3/i4: 3.18/1.71/1.30/1.04
Carburettor: MIKUNI 30mm Carburettor
Air Filter: 42mm Racing Air Filter
Intake: High Performance Intake Manifold, with CNC Alloy Adaptor Plate
Ignition: CDI
Rocker Play 0.05mm
Fuel Type: High Octane Unleaded Fuel (93 or higher)
Engine Oil Grade: 20W/50 MINERAL 4 Stroke Engine Oil
Magneto Type: Electronic Ignition System
Displacement: 160.00cc
Final Drive: KMC #420 Race Chain
Spark Plug: NGK Plug


MATERIAL
Frame: Seamless Heavy Duty Twin Tube Cradle Frame
Plastic Kit: Red/White
Sticker: Red DHZ Sticker Kit
Kick Starter: Forged Kick Starter
Gear Shifter: CNC Alloy Gear Shifter
Swing Arm: Heavy Duty Alloy Single Swing Arm
Fuel Tank: Heavy Duty 5.2L Fuel Tank, with CNC Alloy Petrol Cap and Breather
Chain Roller: 1 Top Nylon Chain Roller, 1 Bottom Nylon Chain Roller
Chain Guide: Wrap-Type Chain Guide
Chain Adjuster: CNC Alloy Easy Detachable Chain Adjuster
Foot Peg: Heavy Duty Stainless Foot Peg
Throttle: CNC Alloy 1/4 Turn Throttle Assembly
Levers: CNC Alloy Anodized Fold Back Brake and Clutch Lever
Exhaust: 304 Stainless Exhaust Pipe and Heavy Duty Alloy T4 Muffler
Handlebar: Heavy Duty Alloy 1-1/8 Oversized Fat Handlebar with Square Rubber Bar Pad
Handlebar Grip: Soft Grip
Triple Clamp; CNC Alloy Adjustable Triple Clamp
Seat: Red Foam Seat


WHEELS AND TYRES
Front Tyre: 60/100-14 Kenda Tyre
Front Wheel: 1.40 x 14 Black Alloy Rim with Heavy Duty Spokes & CNC Alloy Hub Assembly, 15mm Axle
Front Rim Lock: No
Rear Tyre: 80/100-12 Kenda Tyre
Rear Wheel: 1.85 x 12 Black ALloy Rim with Heavy Duty Spokes & Alloy Hub Assembly, 15mm Axle
Rear Rim Lock: Yes


BRAKE SYSTEM AND SUSPENSION
Front Suspension : GPX 735mm Rebound Compression Adjustable Front Forks
Front Brakes : Front Hydraulic Brake with Disc Rotor, Twin Piston Calliper, CNC Alloy Bracket
Front Brake Disk 220mm
Rear Suspension: DNM Linkage Rebound Compression Adjustable Rear Shock, 350mm Long
Linkage: CNC Alloy Linkage, High Performance Bearing Cradle System
Rear Brakes: Rear Hydraulic Brake with Disc Rotor, Single Piston Calliper, CNC Alloy Bracket
Rear Brake Disk: 190mm
Brake Pads: High Performance Copper Brake Pads


CAPACITY
Fuel Capacity: 5.2L
Engine Oil Capacity: 950ml


DIMENSIONS
Seat Height: 755mm
Ground Clearance / Wheel Base: 280mm / 1700mm
Overall Width: 820mm
G.W. / N.W.: 87kgs / 75kgs
Package Size: 1485mm (Length) x 395mm (Width) x 765 mm (Height)

 

[pitsterproAUS]

bro ta hey ,, I carnt figure out how to upload like that hehe still on my training wheels

 

[Cordogs]

BRO YOUR A LIFE SAVER ,, I carnt figure out how to upload like that (

It's what we do!


Reps Craig....

 

[Shearer]

Looks neat as!
Watts the RRP $ of these race bikes?

 

[pitsterproAUS]

hey shearer $2k free shipping to capital city

 

[my67xr]

bro ta hey ,, I can't figure out how to upload like that hehe still on my training wheels

It's easy, that ^^ took me all of about 3 or 4 minute's to do.


Jump on your computer and open up 2x pages, one here in your forum, and one for your website.
Open up the first picture of the bike you are advertising , then right click on it and select copy
Now come to the other open page here
Go into the reply box and left click on the little Insert Image tab (3rd from right) on the top of the text box.
Select from URL, and right click in the box, then select paste
it will paste the code there, and then you select ok.
When you post the pic's, they'll all come up like the one's i posted above

Same idea with the copy and pasting the Spec's
Right click on the start of the text at the top and drag the cursor down to the bottom section of it
It will highlight it blue, and the right click on it and select copy
Then come back to the text box here, and right click where you want the text to start,
Select paste and it will load up all the text you copied
Once you're done select post quick reply and that's it.
Easy Peasy !!


Or if you want, i can do it all for you,
but you'll need to send me a new spare 190FDX for my service's, lol :cheeky-smiley-031:


Copy this ^^ down somewhere and i'll delete it in a day or so to tidy up the thread again

 

[Koper25]

These look awesome, looking at getting one within the next month Accidentally clicked dislike -_-

 

[LEO DPRO 037]

These look awesome, looking at getting one within the next month Accidentally clicked dislike -_-

Post heaps of pics. Review it. Do all that.
Id love to ride one of these things

 

[Koper25]

Post heaps of pics. Review it. Do all that.
Id love to ride one of these things

Can do. I'll probably get a thread going for the track we're building once we start as well.

 

[pitsterproAUS]

As u can see above this model has undergone few slight changes ,
ALL-NEW DHZ OUTLAW160LR | Zongshen 160HO Engine | Buy Online Australia at DHZ

now comes with DOT safety rted wheels, taller cnc bar mounts, new round profile clutch and brakes levers , slight sticker kit changes few other small things