Does anyone know what kind of bike this is? Any help thanks

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

Briceinlv

Member
Joined
Dec 3, 2013
Messages
6
Reaction score
0
Help? Thanks for your help.
 

Attachments

  • picture005.jpg
    picture005.jpg
    234 KB · Views: 21

my67xr

Miniriders Legend and Master Spanner Spinning Mode
Joined
Jul 29, 2010
Messages
11,982
Reaction score
79
Location
South Australia
Some of these little bikes can do over 100km/h, 50cc water cooled engine making over 20hp at the rear.
And 40cc water cooled engines making 14 hp at the rear
 

Briceinlv

Member
Joined
Dec 3, 2013
Messages
6
Reaction score
0
So i guess its not a shiney piece of poo after all..It does haul ass but no turning radius and it doesnt stop as fast as it accelerates.
 

my67xr

Miniriders Legend and Master Spanner Spinning Mode
Joined
Jul 29, 2010
Messages
11,982
Reaction score
79
Location
South Australia
How much clearance do you have between the forks' top tubes and the tank/frame on full lock ?
You may be able to cut/file/grind a couple of mm's off either side of the fork stop tab underneath the frame at the front to gain a bit tighter turning circle?




Brakes, they might be able to be upgraded by using copper sintered disc pads instead of the stock organic friction material pads
Also clean up any glazing on the braking surface of the disc with some 80grit dry sandpaper, that help's them to grab more.

stock disc pads on top, performance/sintered copper on bottom-

 

Latest posts

Top