bulldog93
Well-Known Member
1)Do a quick clean up of your bike get as much of the mud and **** off as possible.
2)Check you chain. Make sure that isn’t too loose or it can break off your stator sensor ( http://www.miniriders.com.au/motor-tutorials/25618-stator-replacement.html ). You’ll then be up for a new one. The oil your chain:
- Cleaning a Motorcycle Chain - webBikeWorld
- Motorcycle Chain Lube - webBikeWorld
3)Check your brakes give them a clean:
- http://www.miniriders.com.au/running-gear/14201-how-make-sure-your-getting-most-out-your-brakes.html
- http://www.miniriders.com.au/running-gear/14996-video-brake-bleeding-masterspoon.html
4)Check spokes. Tighten if needed or replace them if needed:
- http://www.miniriders.com.au/running-gear/18971-how-re-spoke-wheel.html
- DHZ Mini Moto - Wheels & Tyre
5)Give your carbie a clean:
- http://www.miniriders.com.au/carby-tuning/16270-carby-pull-down-rebuild-tutorial.html ( alrounder, Just do the same with your carbie).
6)Put some decent oil in it:
- Shell Advance 4T Motorbike Oil - 15W-40, 1 Litre - Supercheap Auto
- Castrol Activ 4T Motorbike Oil - 15W-50, 1 Litre - Supercheap Auto
7)Clean air filter and oil:
- Motorcycle Air filters – Bike maintenance – Castrol Motor Oil and Lubricants
- Dan's Motorcycle "Air Cleaners"
- http://www.miniriders.com.au/tech-talk/26743-how-clean-your-pod-filter.html
8)Check all bolts are tight, lock tight if needed.
9) Check valves:
- http://www.miniriders.com.au/motor-tutorials/24965-how-set-valve-clearances-horizontal-engines.html
- YouTube - How to check valve timin on Honda 50 70 cc motors
- QingQi (Qlink) 200GY Illustrated Valve Adjustment
If the is anything I’ve missed please tell me or add it to your post. Please contribute.
2)Check you chain. Make sure that isn’t too loose or it can break off your stator sensor ( http://www.miniriders.com.au/motor-tutorials/25618-stator-replacement.html ). You’ll then be up for a new one. The oil your chain:
- Cleaning a Motorcycle Chain - webBikeWorld
- Motorcycle Chain Lube - webBikeWorld
3)Check your brakes give them a clean:
- http://www.miniriders.com.au/running-gear/14201-how-make-sure-your-getting-most-out-your-brakes.html
- http://www.miniriders.com.au/running-gear/14996-video-brake-bleeding-masterspoon.html
4)Check spokes. Tighten if needed or replace them if needed:
- http://www.miniriders.com.au/running-gear/18971-how-re-spoke-wheel.html
- DHZ Mini Moto - Wheels & Tyre
5)Give your carbie a clean:
- http://www.miniriders.com.au/carby-tuning/16270-carby-pull-down-rebuild-tutorial.html ( alrounder, Just do the same with your carbie).
6)Put some decent oil in it:
- Shell Advance 4T Motorbike Oil - 15W-40, 1 Litre - Supercheap Auto
- Castrol Activ 4T Motorbike Oil - 15W-50, 1 Litre - Supercheap Auto
7)Clean air filter and oil:
- Motorcycle Air filters – Bike maintenance – Castrol Motor Oil and Lubricants
- Dan's Motorcycle "Air Cleaners"
- http://www.miniriders.com.au/tech-talk/26743-how-clean-your-pod-filter.html
8)Check all bolts are tight, lock tight if needed.
9) Check valves:
- http://www.miniriders.com.au/motor-tutorials/24965-how-set-valve-clearances-horizontal-engines.html
- YouTube - How to check valve timin on Honda 50 70 cc motors
- QingQi (Qlink) 200GY Illustrated Valve Adjustment
If the is anything I’ve missed please tell me or add it to your post. Please contribute.
Last edited: