Help please, wiring issue

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

Elrooster

Member
Joined
Nov 30, 2021
Messages
8
Reaction score
0
I recently bought a lighting kit for my pitbike, there is only one connection for the ignition, a black wire w/ yellow stripe. The other wire is a green one with a ring connector.

If I solder on the correct connecter will the bike start?

I'm at a loss for what I should do next.
 

Attachments

Last edited:

dirtbkr188

Well-Known Member
Joined
Nov 27, 2011
Messages
49
Reaction score
8
Does your engine have a lighting coil on the stator?
 

dirtbkr188

Well-Known Member
Joined
Nov 27, 2011
Messages
49
Reaction score
8
Okay, how many wires coming from the stator plate through the grommet?
 

dirtbkr188

Well-Known Member
Joined
Nov 27, 2011
Messages
49
Reaction score
8
Is there a white wire? and/or a yellow wire? among those 5 wires?
 

dirtbkr188

Well-Known Member
Joined
Nov 27, 2011
Messages
49
Reaction score
8
The yellow is usually the power source from the stator for running a light
 

Elrooster

Member
Joined
Nov 30, 2021
Messages
8
Reaction score
0
The stock harness is meant to connect to this newer one but it won't start up with all the connections plugged in, there's no connection for the green input on the ignition coil, only a ring connecter that grounds onto the frame. If I plug it in it does the same job as the green wire coming from the stator.
 

dirtbkr188

Well-Known Member
Joined
Nov 27, 2011
Messages
49
Reaction score
8
Can you post some pictures of the lighting kit, so we can get an idea of what you're working with?

Are you trying to plug the lighting kit into the existing harness for your bike?

Post some pics of your bike as well, if you don't mind.
 

Elrooster

Member
Joined
Nov 30, 2021
Messages
8
Reaction score
0
Me, It's a mess I know. It runs but won't charge the lights, it has something to do with the ignition. These two wires should hook on to the ignition coil, only one connection tho, the black and yellow.
 

Attachments

dirtbkr188

Well-Known Member
Joined
Nov 27, 2011
Messages
49
Reaction score
8
You tie the black/yellow wire into the same black/yellow wire that goes to the ignition coil, and then ground the green wire to the bolt that holds the ignition coil to the frame.
 

Latest posts

Top