Help please, wiring issue

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Elrooster

Member
Joined
Nov 30, 2021
Messages
21
Reaction score
0
I recently bought a lighting kit for my pitbike, there is only one connection for the ignition, a black wire w/ yellow stripe. The other wire is a green one with a ring connector.

If I solder on the correct connecter will the bike start?

I'm at a loss for what I should do next.
 

Attachments

  • 20211201_151907.jpg
    20211201_151907.jpg
    85.8 KB · Views: 4
  • 20211202_152503.jpg
    20211202_152503.jpg
    51 KB · Views: 3
Last edited:
Does your engine have a lighting coil on the stator?
 
Okay, how many wires coming from the stator plate through the grommet?
 
Is there a white wire? and/or a yellow wire? among those 5 wires?
 
The yellow is usually the power source from the stator for running a light
 
The stock harness is meant to connect to this newer one but it won't start up with all the connections plugged in, there's no connection for the green input on the ignition coil, only a ring connecter that grounds onto the frame. If I plug it in it does the same job as the green wire coming from the stator.
 
Can you post some pictures of the lighting kit, so we can get an idea of what you're working with?

Are you trying to plug the lighting kit into the existing harness for your bike?

Post some pics of your bike as well, if you don't mind.
 
Can't get it to run with the harness hooked up, there's no ignition connection that works just a black wire w/ yellow stripe next to a ring connector.
 

Attachments

  • 20211203_132926.jpg
    20211203_132926.jpg
    72.6 KB · Views: 6
  • 20211203_161508.jpg
    20211203_161508.jpg
    69.6 KB · Views: 5
  • 20211203_161515.jpg
    20211203_161515.jpg
    58.8 KB · Views: 5
  • 20211203_161810.jpg
    20211203_161810.jpg
    57.8 KB · Views: 5
Me, It's a mess I know. It runs but won't charge the lights, it has something to do with the ignition. These two wires should hook on to the ignition coil, only one connection tho, the black and yellow.
 

Attachments

  • 20211203_162016.jpg
    20211203_162016.jpg
    63.6 KB · Views: 1
You tie the black/yellow wire into the same black/yellow wire that goes to the ignition coil, and then ground the green wire to the bolt that holds the ignition coil to the frame.
 
Thanks for the tips but none of that worked, made my own harness for head light and tail light.
 

Attachments

  • 20220426_181753.jpg
    20220426_181753.jpg
    76.5 KB · Views: 3
  • 20220426_181741.jpg
    20220426_181741.jpg
    71.7 KB · Views: 3

Latest posts

Back
Top