Quantcast

Help with 350 Quad

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

pauly990

Member
Joined
Aug 24, 2014
Messages
10
Reaction score
0
Hi All, I have purchased a 350cc racing quad with yep... electrical issues. the previous owner decided to "Try" fix it and has cut most if not all wires and ripped majority out completely as well.

I'll try to attach a pic ( new one) apparently its an Atomik brand ? but cannot find anything with " Atomik" on it. I has a Zongshen motor. fast ace shocks all round.

If anyone could help with a wiring diagram or point me in the right direction it would be greatly appreciated.

Cheers

Paul

 

my67xr

Miniriders Legend and Master Spanner Spinning Mode
Joined
Jul 29, 2010
Messages
11,982
Reaction score
77
Location
South Australia
Last edited:

pauly990

Member
Joined
Aug 24, 2014
Messages
10
Reaction score
0
Hi Craig and Thanks.

Yep engine # starts with a star then 881.... can't really define the rest yet, just going off a pic i took with my phone one night. The quad is parked up the back shed at the moment. ill pull it out tomorrow arv and write the numbers down. I have a frame # too... VHMATV350Pxxx if that helps.....

Cheers,

Paul
 

my67xr

Miniriders Legend and Master Spanner Spinning Mode
Joined
Jul 29, 2010
Messages
11,982
Reaction score
77
Location
South Australia
nah you'd at least need the engine model number
how does your loom look compared to the one in the link ?

post up a pic of what electrical components it has, and the colour wires, and style of plugs/sockets each one has
eg ignition switch, cdi, ignition coil, regulator/rectifier, kill switch, battery wires, starter solenoid, starter motor , stator, etc etc
 
Last edited:

pauly990

Member
Joined
Aug 24, 2014
Messages
10
Reaction score
0
Ok here are some pictures of the wiring.... and CDI. Ignition switch and Kill switch are gone. Red and green wire from Rec/Reg go no-where I guess postive and negative 12v?





 
Last edited:

pauly990

Member
Joined
Aug 24, 2014
Messages
10
Reaction score
0
I have a wiring diagram for a Warrior that looks identical just different colour wires. I might just try to nut it out.
I'll let you know how it goes.
 

maas0024

New Member
Joined
Jan 3, 2015
Messages
2
Reaction score
0
Hi Paul, can you send me the wiring diagram?I've got the same engine with electrical problems. It would be very nice to have some diagram while fixing it. Thanks in advance.
 

maas0024

New Member
Joined
Jan 3, 2015
Messages
2
Reaction score
0
IMG_20150103_141149.jpg

IMG_20150103_141132.jpg

IMG_20150103_140709.jpg

IMG_20150103_140915.jpg

IMG_20150103_140943.jpg

IMG_20150103_141040.jpg

I am kind of noob in this, but with some help I can fix this. Can someone tell me what these components are and what these wires are for?

Thank you guys so much in advance!
 

my67xr

Miniriders Legend and Master Spanner Spinning Mode
Joined
Jul 29, 2010
Messages
11,982
Reaction score
77
Location
South Australia
the second picture is the ignition coil, it needs power from the cdi when starting/running, and a decent earth to the frame.
the third pic down looks like a CDI plug, it connects to a cdi
second to last is a starter motor solenoid.
last pic is a regulator / rectifier
 

pauly990

Member
Joined
Aug 24, 2014
Messages
10
Reaction score
0
i'm still struggling with this one. any ideas?

I have tried atomik and most other chinese quad places around QLD and they have nothing.
 

deanbailey474

New Member
Joined
Apr 27, 2020
Messages
1
Reaction score
0
Location
Austraila
I have the same pice of shina bike can you tell me where to put the red and black and green and blue wire's if I'm going straight into the 8 pin cdi
 

Latest posts

Top