Help with Chinese quad 110cc loncin engine

Discussion in 'General Chat' started by Johnboy, Jan 18, 2018.

Mini Dirt Bikes

Help Support Mini Dirt Bikes:

  1. Jan 18, 2018 #1

    Johnboy

    Johnboy

    Johnboy

    New Member

    Joined:
    Jan 17, 2018
    Messages:
    2
    Likes Received:
    0
    Hi guys,I am new to this site and would like to hello to every one,I have recently been given two of these Chinese 110cc quads,I have got to a point with one where I have completely removed all the old wiring and bought a new loom (5pin cdi) with all the main bits with it start or button,cdi,stator etc,the quad turns over but does not spark??,I have on the new loom a black/red wire going to the cdi but the stator I have only has 2yellow wires,a blue/white wire and a green wire.there is also another 3wires coming from a switch/sensor with a green wire,a black wire and a yellow with a white stripe through it.I believe this black/red wire is what powers the cdi but my stator does not have this colour on it.any advise would be much appreciated. Thanks guys.
     
    Last edited: Jan 18, 2018
  2. Jan 18, 2018 #2

    Johnboy

    Johnboy

    Johnboy

    New Member

    Joined:
    Jan 17, 2018
    Messages:
    2
    Likes Received:
    0
    IMG_20180116_205826.jpg IMG_20180116_205845.jpg IMG_20180116_205811.jpg
     

Share This Page



arrow_white