Lifan 138cc motor wiring!

[Skynard33]

I bought a 138cc lifan motor & it did not come with any wiring harness or anything I need help finding one please

 

[my67xr]

welcome to miniriders,

there are a few here,
http://www.ebay.com.au/sch/i.html?_sacat=0&_from=R40&_nkw=pit+bike+harness&LH_PrefLoc=2

and here,
http://www.dhz.com.au/?rf=kw&kw=harness

 

[Skynard33]

welcome to miniriders,

there are a few here,
http://www.ebay.com.au/sch/i.html?_sacat=0&_from=R40&_nkw=pit+bike+harness&LH_PrefLoc=2

and here,
http://www.dhz.com.au/?rf=kw&kw=harness

What one will work for the 138? I suppose ill need a clutch cable & lever & also a coil?

 

[my67xr]

it depends on what wiring is coming from the stator? what plugs are used etc
coil is easy enough, just a universal 12v 1 or 2 wire coil, a cheap one will do for now, or there are better ones

this is a decent high voltage coil, it puts out around the same as the more expensive ones,
http://www.ebay.com.au/itm/16090795...AX:IT&_trksid=p3984.m1423.l2649#ht_1688wt_928

http://www.ebay.com.au/itm/13073285...X:IT&_trksid=p3984.m1423.l2649#ht_3174wt_1002

http://www.ebay.com.au/itm/281008930825?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

 

[my67xr]

the clutch cable you will need to measure it up, allow for a bit of slack when turned full lock etc.

http://www.ebay.com.au/sch/i.html?_..._nkw=clutch+cable+pit+bike&_sacat=0&_from=R40

 

[headsmess]

you will need a cdi unit and plug for it. a coil, an actual CDI coil, not "any 12v 1 or 2 wire" type. luckily just about everythings cdi now. try a standard pitbike one. then some solder and heatshrink tubing.

wires from motor is easy. red goes red. blue goes blue, black or green goes black or green. from cdi unit, white goes to killswitch, yellow goes to coil.
cant remember if image is looking into the plug or lookin into the cdi unit

carby.
clutch cable.
throttle cable.

wheels!