1. If you are having issues logging back into the forum since the s/w transfer please use the CONTACT US in the bottom left corner of the main page. This will get you in contact with someone who will help you log back in.
    Dismiss Notice

Loncin 125cc ignition wiring problem

Discussion in 'Ask the Tech Masters???' started by Spamakin, Oct 14, 2018.

Mini Dirt Bikes

Help Support Mini Dirt Bikes:

Tags:
  1. Oct 14, 2018 #1

    Spamakin

    Spamakin

    Spamakin

    New Member

    Joined:
    Oct 5, 2018
    Messages:
    4
    Likes Received:
    0
    Hi all, I bought a pit bike with a loncin 125cc 4 stroke motor however the ignition was dodgy so I removed the ignition barrel and am trying to hot wire it so I'll only need to use the kill switch. Problem is I can't figure out which wires need to be connected so it can be started. It ran fine with the key when I got it however now I can't match the wires and get it to spark. It has 4 wires going to the key barrel and I'm unsure where to connect them. Anyone have any experience with this sort of wiring? Thanks
     

    Attached Files:

  2. Oct 14, 2018 #2

    Spamakin

    Spamakin

    Spamakin

    New Member

    Joined:
    Oct 5, 2018
    Messages:
    4
    Likes Received:
    0
    15394991762466607324435777132869.jpg
     

    Attached Files:

  3. Oct 14, 2018 #3

    Spamakin

    Spamakin

    Spamakin

    New Member

    Joined:
    Oct 5, 2018
    Messages:
    4
    Likes Received:
    0
    Of the 4 wires there are a; green, red, black, and black with white stripe
     
  4. Oct 14, 2018 #4

    Spamakin

    Spamakin

    Spamakin

    New Member

    Joined:
    Oct 5, 2018
    Messages:
    4
    Likes Received:
    0
    Pit Bike Wiring.jpg
    Don't know if last picture uploaded correctly
     

Share This Page



arrow_white