Loncin 125cc ignition wiring problem

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Spamakin

New Member
Joined
Oct 4, 2018
Messages
4
Reaction score
0
Hi all, I bought a pit bike with a loncin 125cc 4 stroke motor however the ignition was dodgy so I removed the ignition barrel and am trying to hot wire it so I'll only need to use the kill switch. Problem is I can't figure out which wires need to be connected so it can be started. It ran fine with the key when I got it however now I can't match the wires and get it to spark. It has 4 wires going to the key barrel and I'm unsure where to connect them. Anyone have any experience with this sort of wiring? Thanks
 

Attachments

  • 15394990229554246399374690827086.jpg
    15394990229554246399374690827086.jpg
    1.2 MB · Views: 1
Of the 4 wires there are a; green, red, black, and black with white stripe
 

Latest posts

Back
Top