Jolinator
Active Member
was browsing husqvarnas website and found this!
Husqvarna Model CR 50 2011
CR 50 2011
The Paul Feeney Group is proud to announce the imminent arrival of the long awaited all new Husqvarna CR 50 Mini Cross motorcycles. The bold move by Husqvarna, to produce a competition specification machine of a high level of quality to meet the demands of Australia’s junior racing fraternity, is set to attract significant numbers of potential purchasers that are limited to a small number of manufacturers offering products in this popular market segment. The all new CR 50 represents the pinnacle of Husqvarna’s proven off road product development with the use of quality materials and components that in turn offer a standard equipment level that is sure to become the benchmark for the category.
The addition of a dual clutch transmission enables the CR 50 to be tailored to the individual requirements of both entry level and experienced riders alike. The opportunity to offer tomorrow’s potential champions such a competitive machine is sure to add to the Husqvarna brands already impressive market appeal.
First stocks are expected to be hitting dealer floors around the country in late Aug / Sept this year. CR 50
Technical Data
Photos
General Specifications
Wheelbase 995 mm
Overall length 1400 mm
Overall width 655 mm
Overall height 880 mm
Seat height 680 mm
Min. ground clearance 250 mm
Dry weight 43.4 kg
Fuel tank capacity 2.7 litres
Technical Data CR 50 2011
Engine
Type Single cylinder, 2-stroke
Bore 39.5 mm
Stroke 40.0 mm
Displacement 49.0 cc
Compression ratio 7.12 : 1
Starting Kick
Cooling Liquid-cooled
Radiator 2
Lubrication Premix 25 : 1
Ignition Electronic C.D.I.
Spark plug type NGK BR 9ECM
Spark plug gap 0.7 mm
Carburetor Dell'Orto PHBG 19
Clutch Dry, centrifugal type
Chassis
Type Steel single tube, steel rear frame
Front suspension MARZOCCHI conventional telescopic hydraulic fork with advanced axle
Fork leg diameter 32 mm
Fork travel 185 mm
Rear suspension SACHS Progressive Soft Damp type with single hydraulic shock absorber, spring preload adjustment
Rear wheel travel 200 mm
Front brake 160 mm fixed disc and caliper with hydraulic control
Rear brake 140 mm fixed disc and caliper with hydraulic control
Rim front 1.50 x 12", light alloy
Rim rear 1.60 x 10", light alloy
Tyre front 60/100-12" 36M, Pirelli Scorpion
Tyre rear Pirelli Scorpion
CR 50
Transmission
Single gear type
Engine sprocket 10 Z/teeth Rear wheel 43 Z/teeth
Transmission ratio 4.3
Type 1/2x3/16"
Husqvarna Model CR 50 2011
CR 50 2011
The Paul Feeney Group is proud to announce the imminent arrival of the long awaited all new Husqvarna CR 50 Mini Cross motorcycles. The bold move by Husqvarna, to produce a competition specification machine of a high level of quality to meet the demands of Australia’s junior racing fraternity, is set to attract significant numbers of potential purchasers that are limited to a small number of manufacturers offering products in this popular market segment. The all new CR 50 represents the pinnacle of Husqvarna’s proven off road product development with the use of quality materials and components that in turn offer a standard equipment level that is sure to become the benchmark for the category.
The addition of a dual clutch transmission enables the CR 50 to be tailored to the individual requirements of both entry level and experienced riders alike. The opportunity to offer tomorrow’s potential champions such a competitive machine is sure to add to the Husqvarna brands already impressive market appeal.
First stocks are expected to be hitting dealer floors around the country in late Aug / Sept this year. CR 50
Technical Data
Photos
General Specifications
Wheelbase 995 mm
Overall length 1400 mm
Overall width 655 mm
Overall height 880 mm
Seat height 680 mm
Min. ground clearance 250 mm
Dry weight 43.4 kg
Fuel tank capacity 2.7 litres
Technical Data CR 50 2011
Engine
Type Single cylinder, 2-stroke
Bore 39.5 mm
Stroke 40.0 mm
Displacement 49.0 cc
Compression ratio 7.12 : 1
Starting Kick
Cooling Liquid-cooled
Radiator 2
Lubrication Premix 25 : 1
Ignition Electronic C.D.I.
Spark plug type NGK BR 9ECM
Spark plug gap 0.7 mm
Carburetor Dell'Orto PHBG 19
Clutch Dry, centrifugal type
Chassis
Type Steel single tube, steel rear frame
Front suspension MARZOCCHI conventional telescopic hydraulic fork with advanced axle
Fork leg diameter 32 mm
Fork travel 185 mm
Rear suspension SACHS Progressive Soft Damp type with single hydraulic shock absorber, spring preload adjustment
Rear wheel travel 200 mm
Front brake 160 mm fixed disc and caliper with hydraulic control
Rear brake 140 mm fixed disc and caliper with hydraulic control
Rim front 1.50 x 12", light alloy
Rim rear 1.60 x 10", light alloy
Tyre front 60/100-12" 36M, Pirelli Scorpion
Tyre rear Pirelli Scorpion
CR 50
Transmission
Single gear type
Engine sprocket 10 Z/teeth Rear wheel 43 Z/teeth
Transmission ratio 4.3
Type 1/2x3/16"
Attachments
Last edited: