Official Post pics of your bike Thread
- Thread starter CRF_JIMMY
- Start date
Help Support Mini Dirt Bikes & Pit Bikes Forum:
This is my bike, picked it up second hand a couple weeks ago. Got it for $375.
From what i can find out about it is that it is a 2010 Terminator 110cc. It is a Chinese built bike.
It was owned by a couple of girls who also brought it second hand. When I got it the back brakes were not working, the front brakes are missing the lever, idle was way high, back tyre was nearly bald and had a major flat spot when accelerating.
So far i have:
Fixed the back brakes (needed a bleed and change of fluid)
Replaced the back tyre and tube (the tube blew, and blew a hole in the tyre!)
Pulled apart the carb and cleaned it, no more flat spot!
Future plans:
Looking to replace rear shock with a gas assist one, and install front brake lever.
Pics:
From what i can find out about it is that it is a 2010 Terminator 110cc. It is a Chinese built bike.
It was owned by a couple of girls who also brought it second hand. When I got it the back brakes were not working, the front brakes are missing the lever, idle was way high, back tyre was nearly bald and had a major flat spot when accelerating.
So far i have:
Fixed the back brakes (needed a bleed and change of fluid)
Replaced the back tyre and tube (the tube blew, and blew a hole in the tyre!)
Pulled apart the carb and cleaned it, no more flat spot!
Future plans:
Looking to replace rear shock with a gas assist one, and install front brake lever.
Pics:
LEO DPRO 037
Well-Known Member
Holee fark, that tyre.!!!..
Fair pop
Fair pop
Last edited:
hughygsx7r
Member
my bike yx150cc and i think a pitsterpro frame.
the bike was pretty smick when i bought it. It had the yx150 engine, quick turn throttle and protaper bars. only had it for two weeks. Got new renthal full diamond grips, new ASV levers, new quality fuel line, new rockstar sticker kit and waiting on my performance cdi to get here. ive given it a good clean and teared apart the carby and thoroughly cleaned it.
the bike was pretty smick when i bought it. It had the yx150 engine, quick turn throttle and protaper bars. only had it for two weeks. Got new renthal full diamond grips, new ASV levers, new quality fuel line, new rockstar sticker kit and waiting on my performance cdi to get here. ive given it a good clean and teared apart the carby and thoroughly cleaned it.
hughygsx7r
Member
where did you get the yellow tyres?
Samuel
Active Member
Should I do a before and after of my bike brand new to upgraded?
hughygsx7r
Member
yeh be good man, before and afters ftw
Samuel
Active Member
After will b soon ill do another post
my67xr
Miniriders Legend and Master Spanner Spinning Mode
That engine is a YX149, with the YX/Lifan style big valve head
Oh no, hope it's not one of these style cdi's
Last edited:
hughygsx7r
Member
that's the cdi haha, whats wrong with them?
my67xr
Miniriders Legend and Master Spanner Spinning Mode
Some of them are designed for using on 2 stroke engine's, so the timing curve is all wrong.
Some of them are wired up to suit DC ignition system's some are suited to AC ignitions.
They are also made with cheap component's,
some don't work from new, some fail quickly, some will advance your timing way too much and the engine end's up detonating killing your piston and possibly taking out even more when it goes
Some of them are wired up to suit DC ignition system's some are suited to AC ignitions.
They are also made with cheap component's,
some don't work from new, some fail quickly, some will advance your timing way too much and the engine end's up detonating killing your piston and possibly taking out even more when it goes
hughygsx7r
Member
what cdi would you recommend?
Samuel
Active Member
All i got right now
hughygsx7r
Member
looks good mate
my67xr
Miniriders Legend and Master Spanner Spinning Mode
Standard CDI is best.
