orion valve clearance

[roost]

hi,can anyone tell me the valve clearances of my orion pro sieres 125?

 

[mjc85]

0.05 i believe

 

[No-Fear]

should be set at;
intake 0.03
exhaust 0.04

 

[user 2364]

t

 

[RD RACING]

when your top end gets abit rattely then you need to adjust the valve clearence [ tappets] / [ rockers ]

 

[scott27]

hi No-Fear will the setting for the vales intake 0.03
exhaust 0.04 work for a lifan 125cc

 

[scott27]

will the settings work for a lifan 125cc

hi No-Fear will the setting for the vales intake 0.03
exhaust 0.04 work for a lifan 125cc

 

[Sidney]

YEs it will work they are the same.

 

[scott27]

thanks mate

 

[pegleg]

should be set at;
intake 0.03
exhaust 0.04

That is way off dude unless you meant .003 and .004

2 thou = 0.0508mm (close enough to 0.05mm)

3 thou = 0.0762mm (close enough to 0.075mm)

4 thou = 0.1mm

They say that it is supposed to be between 2-3thou but with these china engines, Mack recons it is better to be between 3-4thou and heading towards 4thou for your exhaust.

 

[scott27]

That is way off dude unless you meant .003 and .004

2 thou = 0.0508mm (close enough to 0.05mm)

3 thou = 0.0762mm (close enough to 0.075mm)

4 thou = 0.1mm

They say that it is supposed to be between 2-3thou but with these china engines, Mack recons it is better to be between 3-4thou and heading towards 4thou for your exhaust.

hi .003 and .004 work just fine

 

[crog]

How do you do the valve clearances?

 

[scott27]

you take the round covers of at the top of the head and ajust the tappers

 

[scott27]

make shore the moter is at top dead center be for you ajust them