Outer rotor kit dramas

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
hope it works... i want one for my atomik nitrous... would be a waste if it doesnt work, im about to buy one from dhz
 
Yeah the pickup is supposed to be at the front ... Did you have to use a single wired coil with no earth T&G ? ...
 
hey guys i installed the kit and wired it all up and now i can't even get the bike started im seriously stumped ???

where did you buy the kit from.. theres obviously a couple of different kits floating around... and maybe a faulty batch...

have you checked for spark at the spark lead (not the cap)?
have you verified all earths?
disconnect the kill switch untill you have the rest sorted..
does yours have a neutral switch in the harness?
if so is it connected?

what bike is it installed in, what did you do with the charge wires?

maybe post a close up pic of your setup...

not sure what else to say...

did everyone else in this thread get theirs sorted?
 
hallo from Romania!

i just bought an ORK (just like you) and have the same problem...
:).....but i looked on the "www" an found this wiring diagram which is what i was looking for.(and you
)
 

Attachments

  • outer rotor wiring .jpg
    outer rotor wiring .jpg
    52.4 KB
I bought this outer rotor kit NEW OUTER ROTOR KIT ADJUST TIMING 140cc 150cc 160cc - eBay, Other Cars, Bikes, Boats, Cars, Bikes, Boats. (end time 25-Nov-09 17:36:33 AEDST) to install into my atomik with an xy 140 engine.
I installed everything but I couldn't even begin to understand how the wiring went together so I took it to a motorcycle auto electrician to hook it up.
3 hours and $200 later they call me to tell me everything doesn't match up and it makes no sence.
The wires coming off the ignition are pink, green and white and yellow with black and yellow and black and red in a a plug
and this weird one, green and red with this strange plug that seems to go nowhere
Then there is the wiring harness which has
black and white and green wire in one plug (this is the only plug that fits the plug coming out of the ignition)
yellow, black on another plug with a single blue and white and a single red and black in the same bundle
green, black and white on another plug
One single green wire and one single black and yellow wire in the same bundle

I know its hard to tell me anything from this description but I don't have a camera.
I think they have sent me the wrong wiring harness, what do you think? what should I do, am so pissed off. :mad:
Thanks

no offence but your pretty stupid

its not that hard to work out if you have some know all and paitence...

the electrician bike shop ripped you off or they are farking idiots

my mates dad fixed hes and he was a camera technican and just traced the wires to see where they went and found out that 2 wires from the cdi box were around the wrong way

i think it was a ground a neutral or something lke that
 
;)
hope this helps...
 

Attachments

  • Fotografie0864_001..jpg
    Fotografie0864_001..jpg
    83.8 KB
i just purchased a 150cc with an outer rotor and he told me i will have to take it to an electrical electrition that would be soo mutch cash so im just going to see if my mates dad could do it could you guys help in any way? he jut said the coulour will not match you will have to do it your self and it will be here tommorow =/ and has anybody got the same engine as me a 150cc lifan performance engine if you do are they quick as and do they go good? thanks.
 
Yeah the pickup is supposed to be at the front ... Did you have to use a single wired coil with no earth T&G ? ...

yes anybody that gets an outer rotor engine make sure you dont use a 2 wire coil just use a single or it will not run properly.
 
i just bought a 150 lifan performance engine it comes with an outer rotor the guy said the colours never match up you need a little computer thing thst tells you wich wires are alive and wich are just earth and yer after i install my motor tomorow ile post how it got done to help you dude. and by the way is outer rotor alot quicker and better than an inner rotor?
 
yes anybody that gets an outer rotor engine make sure you dont use a 2 wire coil just use a single or it will not run properly.

Mate a single wire and 2 wire coil work the same way, its just the single wire earths on the frame through its mount bolts where a 2 wire has the earth plugged into it. So all you have to do is run a earth wire to the coil to use a 2 wire coil with the ORK
 

Latest posts

Back
Top