sean01
Legend Spanner Spinner
ok picked up a PE 26mm keihin carb kit (carb, adapter, cable and filter) from DHZ and put it on a genuine thumpstar pro 125 (jialing/yx)
Genunine Honda Keihin PE26 Performace Japan Carby - DHZ Mini Moto
the jets that came installed were pretty much useless.
i think it was 125 main and 45 pilot (i think)
but anyways dialing this carb in was a dream..
at first i went the usual 36 pilot but it took ages to idle down so next i went 55 pilot and it was a little too rich on idle.
so settled with a 48 pilot, gave the mix screw a nice 2 turns.
main jet is around 95 but hard to tell as i use jet drills and compare the sizes of jets i already have..
needle clip in middle position.
took it for a razz in the driveway using all of the throttle and seemed pretty good..
i will fine tune it tomoz when we take it out riding..
so all in all, even tho its not a genuine carb it performs as it should.
i highly recommend them
ill post up pics of it installed when the bike is clean lol..
Genunine Honda Keihin PE26 Performace Japan Carby - DHZ Mini Moto
the jets that came installed were pretty much useless.
i think it was 125 main and 45 pilot (i think)
but anyways dialing this carb in was a dream..
at first i went the usual 36 pilot but it took ages to idle down so next i went 55 pilot and it was a little too rich on idle.
so settled with a 48 pilot, gave the mix screw a nice 2 turns.
main jet is around 95 but hard to tell as i use jet drills and compare the sizes of jets i already have..
needle clip in middle position.
took it for a razz in the driveway using all of the throttle and seemed pretty good..
i will fine tune it tomoz when we take it out riding..
so all in all, even tho its not a genuine carb it performs as it should.
i highly recommend them
ill post up pics of it installed when the bike is clean lol..