Hello, i have a question,
i have a Chinese bike a orion 250cc a 4 stroke air cooled engine. The factory that made it is ATV | Dirt Bike | Pit Bike | Electric Bike Manufacturer And Wholesaler-- China APOLLO/ORION/HYENG/HYENA Sports. and they dont want to send me a explosive view of the engine because im not a company bla bla.
To the problem is my bike has not been started for 2 months untill 1 week ago when i got new tiers and took it for a drive and i was just gonna heat it up to make the oil come out smoother.
but i pushed the bike to hard, and i think it was to little and very old oil in it since i drive the bike to the buss stop everyday "to get to school live to far away from it to walk to the buss"
anyway the engine got very very hot and i suppose i burned the connection rod, crankshaft
the "ball bearings" on them since they got no oil and i was driving a bit to fast in the hot sun the bike just randomrly died and was not able to start for around 15 mins " i was still able to "kick" so the pistion were not stuck or anything.
So after 15 mins it started and i was able tio ride home and it made a really wierd knocking sound like this rod knock Rod knock - YouTube
The bike is still working but i dont dear to ride it atm since i need to repair it asap to be able to go to school and all that
i bought a stethoscope to hear the sound better and check if it was my valves that was knocking when they opened and closed but it wasn't since i was able to hear them with the stethoscope very good and they did not knock
can it be this that have happen to my bike? ROD KNOCK!!! What it looks like inside the engine. - YouTube
and since my bike only have 1 piston should it even be able to start and all that with that huge damage that is shown in the video on the char?
this is how my bike almost look "same engine but the apollo" website says that this is a copy of my bike they made for 2 years ago but it looks the same
http://www.motorsweden.se/image_archive/showimage.php?version=5&image=OTktMDAwMw==
im going to open the engine and check if i can find anything broken and would be helpful if you could tell my what you think it might be that sound so bad
/sorry for my bad English im still learning
/from pimp1 in sweden msn/mail [email protected]
i have a Chinese bike a orion 250cc a 4 stroke air cooled engine. The factory that made it is ATV | Dirt Bike | Pit Bike | Electric Bike Manufacturer And Wholesaler-- China APOLLO/ORION/HYENG/HYENA Sports. and they dont want to send me a explosive view of the engine because im not a company bla bla.
To the problem is my bike has not been started for 2 months untill 1 week ago when i got new tiers and took it for a drive and i was just gonna heat it up to make the oil come out smoother.
but i pushed the bike to hard, and i think it was to little and very old oil in it since i drive the bike to the buss stop everyday "to get to school live to far away from it to walk to the buss"
anyway the engine got very very hot and i suppose i burned the connection rod, crankshaft
the "ball bearings" on them since they got no oil and i was driving a bit to fast in the hot sun the bike just randomrly died and was not able to start for around 15 mins " i was still able to "kick" so the pistion were not stuck or anything.
So after 15 mins it started and i was able tio ride home and it made a really wierd knocking sound like this rod knock Rod knock - YouTube
The bike is still working but i dont dear to ride it atm since i need to repair it asap to be able to go to school and all that
i bought a stethoscope to hear the sound better and check if it was my valves that was knocking when they opened and closed but it wasn't since i was able to hear them with the stethoscope very good and they did not knock
can it be this that have happen to my bike? ROD KNOCK!!! What it looks like inside the engine. - YouTube
and since my bike only have 1 piston should it even be able to start and all that with that huge damage that is shown in the video on the char?
this is how my bike almost look "same engine but the apollo" website says that this is a copy of my bike they made for 2 years ago but it looks the same
http://www.motorsweden.se/image_archive/showimage.php?version=5&image=OTktMDAwMw==
im going to open the engine and check if i can find anything broken and would be helpful if you could tell my what you think it might be that sound so bad
/sorry for my bad English im still learning
/from pimp1 in sweden msn/mail [email protected]