Tozzi's - 1974 [ k3 ] candy topaz orange ct70 + 1969-71 [ k0 ] candy sapphire st70

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Tozzi

Active Member
Joined
Jun 15, 2008
Messages
40
Reaction score
1
Location
SinCity
Hi everyone

I'm Daniel. New to the honda mini-bike scene but not so new to the pit bike scene.
I hope to meet some new friends and mini bike fanatics. I'm always looking to help where I can, all your feedback and insight would be great!!

Having owned 4 pit bikes 3 in the past and one currently I defiantly knew my way around the problems these bikes commonly suffer and didn't find servicing and modifying at all difficult. Have always loved the simplicity of mini bikes and pit bikes.

Still have a tonne of parts in the shed, enough to build a bike. But I'm no bike restorer/builder

-1st gen atomik 125cc semi auto (ducar engine) talking mid (2005)
-provert 140cc (2006) manual
-assassin 140cc (2010)
-atomik nitrous 160cc (my current bike) (2012)

d4d6d9e4a43ac517d59cd2a6abb3b5cd.jpg


ded8af651445971fab5762bec53a56b5.jpg


About a month ago I happened to be on the market for a motovert rx125 which I was going to register and modify to be a fun little suburban machine, until I found what was to be a 1974 Honda ct70.

a18640c868fe88c526c6f72c86bd370f.jpg


9ab526cf2d7f765db442045b56377762.jpg


fd5443d6f5d1667c8229309509f2792b.jpg


3595ddd330d5960b369bc6c9ca53a40a.jpg


I hadn't ever seen anything quite like it. It was new to my eyes and I simply couldn't stop looking at its potential. I always knew about the z50s but never these things!
I searched them up on google, and found that there was a huge market for these overseas and they were road registrable. Further research lead me to find some cool forums such as this one. I was defiantly keen on showing everyone what I can do. Seeing as though there's a huge scene on vintage honda minis.

After I saw the huge amount of parts on the market I was now well off the idea of the motovert and had to have this ct70. So this would be my first ever restoration project and build.

The particular one I was looking at was on eBay. Still 3 days remaining and I was worries as there were 33 bidders already. Keeping my head high I placed my highest bid and 3 days later I had won the bike only just.

I was now the owner of a k3 1974 candy topaz orange ct70

But the bike was in Wagga Wagga and I'm in sydney so it wasn't going to be a trip in the park pick up. My 4wd was off at the mechanics until the following week and I defiantly didn't want to wait that long.

Planned the trip for that Saturday and left for Wagga at 6am. Other than hitting a wombat at highway speed and blowing a tyre at goulburn. The trip in my dads 1986 Toyota hilux automatic 3 speed (scrap metal ute) was ok. Oh what the hell!!
Let me just say, I won't do a drive like that again without the comfort of cruise control and the peace and quiet of new door and window seals hahaha.

Other fails - carby motor that doesn't move and screams worse than my 1 year old nephew at 60. Had to fill up 4 times. Gear ratios on thin ute defiantly not for highway use. NEVER AGAIN lol!

2dced87d715cad13f63d9684a2ebc380.jpg


Got there around 1-2 and paid the man!
It was official, a receipt, the keys and a big smile on my face.
The ct70 was mine, never had seen one in person so I was like a kid at Christmas.

Drove back to sydney, much better drive back. It defiantly felt good to be home after 12-13 hours on the road. I sat in front of the bike with a notepad and started noting down what I saw I needed to do and buy.

Here is how she sat when I bought her

3ea856cb42f8d315da6c672605074a6e.jpg


e2b16b357a795af29cabda86cd023bb1.jpg


Things wrong/missing:

-front indicators and indicator stem missing
-Tail light bracket, tail light, Rear indicators missing
-Key to ignition different to helmet lock (previous owner had lost it)
-snapped brake lever and cable (front)
-throttle cable worn
-rear brake switch spring missing
-indicator switch console missing
-damaged front fender
-minor dent on rear fender
-frame handle missing
-seat torn and rusted underneath
-rubber battery flap missing
-exhaust heat shield dented
-steering stem bearings felt sticky and worn
-headlight ears/fork top covers dented
-broken right fork reflector

And along with some very minor surface rust on some of the chrome pieces.
I'm sure I've missed a few little things but that's all the big stuff that needs attending/replacing. The rest was just dull and dirty from years and years of storage.

The lights were not working when I had bought it but I knew that wouldn't be a huge issue to fix seeing as though the battery looked to be at least 20 years old and wiring kits were readily available online.

After a few busy days at work I took some time to start this build and see what else was needed in the spots I hadn't looked yet.

The stripping process had begun!

4ef5a7e7b1535594bfabe0e46e6ef2a2.jpg


0f3fc507ff3f71a72daa320e51b7f11d.jpg


b918470309a88d98516cb38009b9712e.jpg


2161cea1c62567473597c2b4477d3587.jpg

Front forks are in great nick, just in need of some polishing, some new oil and seals. Will be kept aside to restore this bike back to 100% original one day.

af5d9528ad46666834f0328cce7fcc8d.jpg

Like I thought. The wiring loom is in excellent condition and won't need to be replaced. No cut wires anywhere. Just some that have been added by someone in the past for some strange reason.

Seeing as the plan for now is to restore the bike to OEM standard (for now) I will keep the 6v electrics.


[more soon, just writing up pt 2 and uploading pics]
I'll reveal the k0 sapphire st70 soon also

-Daniel
 
Last edited:
Sweet build mate,

Sorry your thread got auto moderated, it is all fixed now :)

Carlton
 
The bike now was at its last stage of diss-assembly.
The final finishing parts removed, everything nice and carefully

Except the rusted out exhaust bolt!!! dremel did the job cutting that out.

and there we have it

c78715d15849365283d103817abeb7d5.jpg


35a3ddd0a241b66184edf4674ae27d39.jpg

The structure.

Did some panel work today on the head light bucket which was slightly dented. Thought id use normal metal bog. Paint was stripped using metal brush attachment on a standard impact driver. I used this technique for all my paint stripping. Gives it a nice file finish without eating at the metal.

3003842ab4577ffcd24c64d28cbd2091.jpg


cc0253a42fe4cdfc8991d97320c65e3f.jpg

(wire brush attachment fitted)

The powder coater sent me home with a stick of "sellys" knead it metal epoxy.
Much harder to work with and sand, but it dried up like metal and can withstand the baking heat for the powdercoat.

338f318740e691ba564ee2163c576be1.jpg

i reccomend this stuff to anyone! It fixes anyting that fillers cant. Kneadable steel putty in basic words.

d74df858cc0406fdbc33c5a14453df75.jpg

The heart ( the standard engine ) has now been sent to RICHIE (RCRAFT) for a overhaul and restoration back to original. Heard a lot of good things!
Motor is expected back end of this week looking and performing as new as it did 40 years ago.

Frame and swing arm sent to the sand basters and is expected at the end of this week also!

Along with:
-fuel tank
-fuel tank face bracket
-footpegs complete rail with stand
-headlight bucket
-speedo bracket

Which are all coming back powdercoated gloss black.
(pix will come when i get everything back)
 
Last edited by a moderator:
I took a trip a bunnings earlier last week to buy some wet and dry sand paper and some metal polish. (the oldschool way)
until i had come to a section where i had found a whole isle on buffing pads and accessories for converting your ordinary bench grinder into a polishing machine.

6094d6a2ff5552841a8f5d844359d91f.jpg


I knew i had an old bench grinder lying around that dad had not used in years so i bought Buffing disks, Buffing disk adapters and metal cutting and polishing compound. Hoping id give it a try and get some results (it was a first for me)

001617643ad9befb6d837e6885763d99.jpg

i got home did the quick and easy buffer conversion and wallah!
My new polishing station.
(headlight bucket now sanded and level with "knead it") Ready for Powdercoat!

I must say i didnt know how to start, but read some instructions and watched some youtube tutorials and i was ready to get into it for myself.

3b7415c0ab562bad1df6569f83f64107.jpg


Here are the results:

0c55f7be30fe12c9d55d0f42c16ac951.jpg


4cfd2f79f0c986484e424d3d3cfa1033.jpg


35bbae3722a66e2e010d2c57ed83cdde.jpg


53449a66f271b5edaeb3ad6f6b3dd39e.jpg


674a0fd39e43e1b84928b0478d707790.jpg


I will take better pictures of the shine with a better camera. There aren't any imperfections and nothing but shine! Ive saved myself a lot of money on replacement parts which just needed a good clean and buff.



Thats all for today.
more progress tomorrow!

goodnight :)

-Tozzi
 
Last edited by a moderator:
good build mate, im about to do a similar thing with a postie but with different components... after seeing your nice and shiney parts i may have a crack at cleaning mine up :)
 
dratv.com will probably have the parts you need, also if you have a issue with wiring and whatnot then they have diagrams
 
Thanks everyone :) happy to be doing this build. Had thoughts of keeping the k3 100% original but after some talk and realisation that this model wasn't so rare and many were bought in oz Im deciding to custom this thing out. Kinda like http://www.pipeburn.com/home/2011/8/21/1977-honda-ct70-dax.html my inspiration build.

Wait for more updates in a couple hours ;)

Thats gotta be one of the sexiest things iv'e ever seen, if you could even get half way there it would be the best looking mini in Aus.
 
I remember when they were new! That brings back some memories, awesome
 
Thats gotta be one of the sexiest things iv'e ever seen, if you could even get half way there it would be the best looking mini in Aus.

Well im defiantly going for a custom cafe racer look. Wait and see what i have in store. Some parts I've had to get made custom, and with advice from some deus fanatics. Some parts i just found on some random japanese sites online which i needed google translation and a good translator to communicate and negotiate international shipping. overall this build is looking to be fun, for now its going original for rego!
 
I remember when they were new! That brings back some memories, awesome
Well past my era! Being 22 and a sydney city boy i cant ever recall seeing one ever! Cant wait to turn some heads.
 
Sorry for the the late progress post, ive been busy on the bike. This is the latest news.

So ive decided to go the 88cc kit :D
I will have it back by mid next week.

Today i took another trip to Bunnings today in search for some smaller metal polishing pads and new wire brush attachments to get the rims and hubs done.

this is what i picked up

b1a16e81e9ca77b3e5349b464f914dc0.jpg

Josco make the best products for paint stripping and metal polishing, i have only used their products throughout the project and their products simply make it too easy! This particular kit was to turn a ordinary drill into a metal buffer/polisher.

374c17cca9a6a4eb1ad164fff62a5a38.jpg

Along with new bench grinder pads.

Went into the shed and started disassembling the rims.
For someone who was used to pit bike hubs this was very new to me.
I didn't know how to start? until i found a thread online telling me i had to remove the circle snap ring. Which wasn't easy at all! is there a trick to it?
I needed my mrs help me jam a screwdriver in the gap while i used two screwdrivers to force them open then i used the jammed screwdriver to yank up and pull it off. No damage to the snap ring, but surely that isn't the right way to get that off.

b7389f132700922b8e61260910281b40.jpg


Rim hub was then easily removed off the rim, mind you the tyre was stuck on tight! That was by far the hardest part of the job.

7d1b73262c1868a9ac9320ed5aca3771.jpg

I now had everything ready to be polished.

I had now realised rims were steel, and i had a feeling i wasnt going to get the finish i wanted.

I had to try anyway!
I started polishing!

661654e1934b858938f1a6f3f846edc5.jpg


2bf2870a2ab5a7f864cb56441d4ceb17.jpg


4966a34fb082ea04693b55ec80820b7e.jpg


NO RESULTS. other than a no shine clean. :(
I tried and i tried. Being a perfectionist, and this being a 99 point restoration (lol), i had chosen to go a different path.

Used a wire brush attachment on the rims and started filing away all the grit, oil and what seems to be Hondas original rust protection layer on the rims.

Not to worry, everything will be back to factory shiny silver tomorrow!
I will be giving them a prep tonight ready for some paint tomorrow.

d86cc1e0ee426d2eb964b63f4980dd14.jpg


d3d8deff8b73c400772816667258d21e.jpg



Heres a clearer picture of my polishing for those who wanted to see.

66cd4a5b93acdb77b3c90bbcb0fe6d1d.jpg


Tonight i will be working on polishing up a brand new polished up (factory finish) oem honda engine cover that was dropped by the previous owner. I picked it up for $30

I had to strip it down using the file brush attachment :( killed me to do it!
It was such a nice finish, but i wasnt going to have scratches on my engine cover. I hope to get a chrome finish all round, shinier than factory ;)

e3b676949a39ecaa606640faa60fb80a.jpg


77efe00692e4920b47ef332adb695a41.jpg


Anyway thats enough for now, ill update more later tonight :)

-Tozzi
 
Last edited by a moderator:
circlip pliers would have done it for ya :p they get alot of people those snap rings
 
I wonder what metal flake would look like on the rims
 
There has been a heap of progress since we all last met.
Heres the low down.

Since we last met i made a trip to super cheap to buy some clear coat for some of the bolts i was polishing up, rust remover and a stripping grinder disc as recommended from someone online on the forums for my wheels.

All 3 were found and i went home to get some progress done.

The striping disc purchased was one called "Norton stripping grinder disc" only made in 115mm size and only stocked at supercheap in extra course.

d972fb38873730d78e7c4787d2d29871.jpg


973bed41319077c6db1867987b5af54b.jpg


I fitted the disc onto my new makita lxt cordless 115mm angle grinder and started attempting stripping the wheels to bare metal.

4d166e2ed8df8ec6f79eed0f02aed12c.jpg


02f3dccd0e5e5cdc69e618d313e842c9.jpg


As stated by a helpful forum member these discs seemed to be VERY effective.

I then spent about half an hour per rim half and these are the results. I used the wire brush attachment on the drill to get the fine "hard to get corners"

This is how they turned out!

6c9005c16623b0e1d8c9ebab9eac4de1.jpg


8098700934038c1dab7c7655807aa18e.jpg


Before - After

102ea1778e7ddb427f16746b56f1dbc5.jpg


47dacd3415516ad74576e472478756ae.jpg


I cant be more pleased with the results.
I then proceeded to do the other rims ( pictures in next progress post )

I received call later that day from my powder coater and sandblaster.
All my parts were sand blasted, the small bits were awaiting gloss black powdercoating so i just took the frame and swing arm hoping to find a painter asap.

e513833a6e09d01ef4c4926ca38fd1e5.jpg


Coincidentally Richie (R-CRAFT) texted me along with a picture while i was at the powder coaters, my engine was ready for pick up!
"looking, and performing like new inside and out"

255125ab4302c725302dad1a8e0f3472.jpg


Today was going to be an expensive day, as i was not going to sleep without having my engine in my possession. So i drove to a atm and went to richie.

After a small chat i decided he was the guy for my paint, so i left my frame and swing arm there while we source the closest to original colour we can find to:

-Candy topaz orange

I then picked up my engine and drove home to have a proper look.
Heres the beauty!

d5b0fbd2481d614791fbe06f3547fb1a.jpg


fa6beefb6ca3b0d2014791f8ed47a744.jpg


and after fitting the engine cover which as you can see polished up nicely, but finishing off for final polish tonight. I also cleaned some grime build up around the front sprocket area along with test fitting the original carb. ( which will be replaced by a kitaco flat slide )

7163ccf2d1dd0005b42ce8af336d97de.jpg


cdf2e77051898a5966957d2888814aa3.jpg


I now really do feel like a kid at christmas!
 
House of Kolor has an awesome candy orange.
 

Latest posts

Back
Top