YX or Z155

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
You shouldn’t get any kickback just make sure the piston is at top dead centre before you give it a hard kick and try not to give it throttle when you do it
I find it only kicks back when you give it some throttle
 
So seems like ive got pretty good clearance fitted with 110cc engine.I can turn the carb anyway i want and full sideways till it hits plastic so i think the manifold isnt going to be problem.So measured the engine mounts pretty accurate.My stock engine has footpeg mount points.
Top mount of the stock engine:92-93mm
Bottom mount of the stock engine:81-83mm
Now some photos,i dont know why the quality went to 480p as it was took at 1920X1080P:
View media item 12985View media item 12986View media item 12987View media item 12988View media item 12989So looks like i have plenty of space behind the engine too,the rear brake maybe is in way but i can weld it sometime.
The engine is apart because it had gearbox issue that the gears were all broken so not worth fixing.
 

Latest posts

Back
Top