Recent content by aldo

its pretty pbvious he has a better bike... the fact that he paid 2000 for it second hand and i paid 800 new for mine makes it pretty obvious.... we was just wondering about speeds

when i start my atomik prox 140 sometimes it starts then other times the starter just flops down and then when its going it makes a real bad banging sound and vibrates in the crankcase, also it wont go past 3rd gear what would be my problem? any help would be appreciated

try a bit of aerostart

thats an idea

does she go?

what? well i just got the holes blocked up the oil still goes around the engine but the oil doesent get cooled as much as it does with a cooler on

but you still have to put oil in the bike like normal

yep they just took the cooler off and put special bolts in the holes , pretty sure all the cooler does is feed the oil up the lines into the cooler then it cools it from the air hitting the cooler then the oil going back to the engine so ist nothing special if i am right

yer they help a bit depends what kinda bike its on too ,,,,mines a 140

drain the oil and go to the local minibike shop and you can buy bolts that fit into where the oil lines come out of the engine and just get rid of the cooler i reckon shell be rite then

dunno i took it to u guy to get a few things fixed and the oil cooler was one of them and he said its just a waste of space having it on there and he told me he had done a test on it and it wasnt worth spending money on gettin a new one

pimp my postie :)

yer but you muck around wasting money on oil every 2 minutes :)

yer this problem is pretty common on china bikes, the air pressure gets low and it spins off the rim, keep the tyres pumped and a rim lock is the way to go, cost me about 50 bucks to get a new tube fitted and a rim lockput in

well my oil cooler leaked so i just took it off and it only made a couple of degrees difference to the engine