Recent content by ayjayjay

hey guys, tried researching the exact information but no luck. Air/Fuel mixture screw - to screw in or out, which way is lean and which way is rich?

thanks buddy, am in contact with rival ink designs as they reckon they may have templates too suit..

hey guys, anyone know of anyone who sell or make sticker kits for the brand fury?? have sent a few emails out but no luck with online shopping...

Thanks for your help guys!! we rechecked the wiring - was all ok, pulled the carby apart and it was completely dirty, cleaned that out, refitted it and if anything it got worse, took the carby apart, rechecked everything and of course cleaned it some more, re-installed it, kicked first go and...

hey guys, we've pulled out the old inner rotor kit and installed the standard 160cc stator kit and idles killa!! but soon as you turn the choke off, the exhaust and carby starts popping and back firing. Now we used a good known spark plugs, same result used clean 98octane fuel, same result...

Thanks loads guys!! Always great help

Hey guys, brother in law has an atomik 160cc big foot, for some unknown reason the bike has spark everytime you kick it over but will only fire up then stall maybe after the 20th kick, could this be magneto/stator or even cdi at fault? is there a way we can test the units we have at the time...

hey guys, not sure if anyone is following, but i done a bit more research and i stumbled across and found that the xtm 140cc by the looks has the same frame and plastics, but wonder if anyone on here may have a kitted out xtm bike and please tell me where abouts online they get there goodies...

just for future reference really, at the moment am chasing some new graphics :)

hey buddy, hopefully this member is still active, where did you buy them graphics from??

thanks craig, yes that is the bike, my bike built date was october 2011, but wasn't sold till dec 2013 as the previous owner gave me the receipt papers. yeah finding it very hard to find parts online for this bike, so thought maybe one of you guys could help and point me to the right direction

Hey guys new here, typing from Perth W.A. recently bought a 2nd hand fury f155cc, have been in the mini moto scene for a few months now so am aware of what bikes are out there at the moment and can source parts online but can not find any online parts or specs about this "Fury" brand so...