Well sure enough the bike runs like a bat out of hell...think I need to mess with the mixture screw a little cause it hesitates just a hair...but it's a completely different bike and now on to the upgrades!! Thanks for all the input guys
-Brett
Current Project:
Apollo ADR 125
hahahah the little child in me laughed hard at that...thanks
Anyway I went ahead and bought this Cookie Usage : MotopartsMaxATV Parts & Dirt Bike Parts, Moped Parts Go Kart Parts, Dune Buggy Parts and Accessories
I've got some #20 jets on the way as well as a new airfilter...we'll give...
So I threw a washer under the eclip on the needle to see if that would help my non choke performance...pretty sure it made it worse
Runs great on half choke...here's a video
https://vimeo.com/121579207
Guess I'll finally just junk this carb and go for a new one...any tips are appreciated...
So are you recommending to downsize from the 26mm to a 22mm? Looks like there's versions of that in 26mm as well.
Also the only port I see going into the carb is from that main jet...I'll see if I can't get something to poke through that pilot hole though. Thanks!
-Brett
Current Project...
Well since I've got to asking all these questions I decided to go down and take it all apart again...here's both sides of the carb
I took the jets out and none had numbers on them...here's what I got
Also was wonder if there is a way to get that brass out of the far right hole? I...
Hey Craig thanks for the info...I had a hell of a time getting that carb apart as it didn't have actual screws but more of a rivet so I had to drill those out and back them out...anyway when I finally got it apart it was the cleanest carb I've ever seen...it's a copy of this Mikuni 26mm Flange...
Hey guys I picked up this bike for $225 off Craigslist for my first pit bike project...the previous owner had absolutely abused this machine for it being so new.
It had a broken rear hub on the sprocket due to the knuckle head using a large wood bolt instead of getting actual bolts that fit...