Recent content by Digler

The bike starts and idles good now. I'm having problems with it riding. When I put the bike in gear and take off the bike speeds up for a few seconds then starts sputtering and backfiring. I know the carb is clean. I saw on the internet it might be the rev limiter but have no idea where it is...

Alright I finally found some clear tube. I checked the float level like you said and the fuel is even with the top of the fuel bowl in the tube. I'm guessing this isn't good, how do I adjust this?

I sprayed carb cleaner both ways through every jet and port thats in the carb. You are correct my carb is just like the ones you have pictured. I will measure the float once I get some clear tube. The bike no longer has a problem with the idle. It idles great now. The first 1/4 of the throttle...

So I stripped the carb all the way down. Soaked it in cleaner for the night the sprayed it with carb cleaner. All the holes are clean. I changed the spark plug and it is still sputtering and backfiring when I try and speed up. I was wondering is there an adjustment to the main jet in the carb...

Its not sputtering when I blip the throttle its when I put it in gear and get going. I get rolling then it starts acting up. Not sure what carb it is. I'll try and send a picture

Ok, I checked for leaks first and instantly found a leak in the spacer. Fixed that and tried getting the idle set and it idles perfect now. It has however uncovered another problem. When i took it for a test ride, when I gave it throttle it would backfire and sputter. It seems as though the...

Ok, I have a 125cc Apollo I got it from a guy in trade. When I saw it the guy told me that it had to warm up before it would idle at a normal rpm. When I got home and started playing around on it to warm it up, it would never idle at a normal rpm. I thought it might be the carb needed to be...