Recent content by hoggo45

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. hoggo45

    Bigger wheels on a Nitrous mid size

    I dont just get a Atomik Reign Bigfoot because the front forks are not up to standard for rough trail ridding, way too rought. I like my DHZ 140 crf 70 frame bike because I can easly get good parts from DHZ, I just wish DHZ made a big foot version for peole who like trail ridding, the...
  2. hoggo45

    Bigger wheels on a Nitrous mid size

    Thanks for all the info, now I have just got to jump on ebay and get me the 14 and 17inch rims and tyres and get to work, Interesting to see how the front forks hold up, I may have to replace them at a latter date.
  3. hoggo45

    Bigger wheels on a Nitrous mid size

    I mostly ride my bike on 4WD fire trails and Water erosion puts lots of ruts Just the size of my 14in front wheel, hit them wrong and the front digs in and throws you forward. Also should make the bike a bit easer to ride in soft sand. But I do think the standard 14/12 Wheels do look...
  4. hoggo45

    Bigger wheels on a Nitrous mid size

    Thanks Guys, What swing arm would I need to get ?
  5. hoggo45

    Bigger wheels on a Nitrous mid size

    I have a atomik nitrous 150 mid size (CRF 70 Frame) running the standard 14in front and 12in rear wheels. I ride on a lot of rough trails with deep ruts and sand and i would like to fit larger tyres as it would make ridding the bike easer. Can I fit larger wheels with out doing any major...
  6. hoggo45

    New Atomik nitrous midsized

    I have a nitrous 150 mid size and its a good bike for the price,. The DHZ 140 mid size is a better bike but
  7. hoggo45

    Atomik 150 mid size carb issues

    Thanks guys
  8. hoggo45

    Atomik 150 mid size carb issues

    I have a new Atomik 150 mid size has a 26mm molkt carb I started it up and run it for about 10 minutes, I throught the bike was idleing a bit low so i screwed the idle up a bit on the carby, bit mastake, Now the bike runs crap its rought and stalls if your not giving it heaps of...
  9. hoggo45

    Rear Brakes on DHZ Dpro 140 locking on

    The rear brake on my Dpro keeps on locking on after about 10 or so minutes of ridding it has done this 2 times now, When the bike and brake is left to cool down it unlocks and works again. Any ideas on what would be causing this and how to fix it ?? Thank you ;)
  10. hoggo45

    Starting at DHZ DPro 140

    I got the new girl started. Thanks for all the help. In the end after many kicks it started with 1/4 throttle and the choke off. I am looking forward to the running in process and getting the beast out in the bush
  11. hoggo45

    Starting at DHZ DPro 140

    Thanks for the help, Still no luck getting it going, It has spark, I ever tried a different spark plug, and its getting fuel, It may even be getting too much fuel cause a small amount of fuel is running out of the drain hose at the bottom of the carbie. This is starting to give me the Sh_ts...
  12. hoggo45

    Starting at DHZ DPro 140

    I sold my Atomik 140 and Myself a DZHZ DPro 140. Its a great bike very well built ect, I put it together tonight, One think, I changed and drained the shipping oil and put new oil in it I put fuel in it and well I cant get it to start, It kicks over and farts a bit but just will not fire up...
  13. hoggo45

    atomik nitrous 140 front shocks lengh

    I measured from the axel bolt till the top of the shock
  14. hoggo45

    atomik nitrous 140 front shocks lengh

    What is the lengh of the front shocks on the atomik nitrous 140 CRF 50 frame ? I measured it to be 620mm But the atomik website says they are 735mm. So what is the lengh ? Am I measuring wrong ? or is the atomik website wrong ? I want to get new front shocks but I dont want to buy the...
  15. hoggo45

    Motovert

    Are Motovert the best Pit Bikes you can buy ? and are they worth the money they cost ?
Back
Top