Recent content by Linkavitch...

rear shock on my shock, i rebuilt it with thicker oil, i cant remember what it was, but that and a few turns on the spring, it was handling and dampening like a dream, its worth the time taking the shock apart and replacing the oil. if you need instructions on how to dismantle it just message...

xr250 conversion Ive seen someone put a zongshen 250cc in a xr200 frame, the mounts were all the same...i cant find the website now but ill try to find it and I might have a look at my mates xr250 and compare it to my tomahawk kx 250.

~~~ well, if you are mechanically minded and enjoy working on your bike, then i think you will enjoy this bike, but just remember than you have to do a bit of work once you get it to get it all up to scratch. i think the quality of chinese bikes are improving vastly, so if you just put the bike...

rattling at idle? hey guys on my kx when i start it up and run it until its warmed up when you let the revs drop down to idle then a small rattle starts up. i think its the cam chain but i dunno how to tighten it theres an allen nut near the starter motor and when i take that out theres...

520 chain ive finally put a 520 gauge chain on my tomahawk kx. i did the same thing as with the larger rear suzuki sprocker and with the front sprocket all i had to do was file half a millimeter off each umm spikey thing inside the hole dunno what theyre called but anyways got a 13t front and...

airbox i fitted the airbox i bought off ebay but i had to move the battery out to the side a bit, went through some water crossings and it held up ok, but a fairly small filter so ill have to clean it regularly, the 450cc hummer sounds good but i hope its not too heavy

air box on ebay i recently bought an airbox for a 250 cc quad bike. It was only about 16 dollars + postage from gold coast and it had a fairly long hose so i wasnt complaining...ill give a review when it arrives. I also bought a shock absorber off a honda xr350 because its the right length and...

oil and dont use oil with friction modifiers ur clutch will slip until its stuffed

oil for my aircooled hummer i use bp superbike 4 for 4 strokes...use a multigrade oil

Parts store Hey I found this website they have top end kits for hummers, armour, barkbusters, all sorts. Check it out http://www.motoxspares.com.au Try to spread it around the site..

sprockets Hi everyone, on the weekend i fitted a bigger (55t) rear sprocket off a suzuki onto my tomahawk kx. To do this you will need.. A sprocket off a suzuki tf125 tf185 ts125, ts185 or similar. Look at this site. JT Sprockets: Catalogue A welder (optional) A drill A set of drill bits A...

sprockets does anyone know whether they know of a 520 sprocket to fit a hummer/tomahawk? I found a suzuki TS185 one that if you drill new wholes fits on excpet the middle hole is like 2 mm too big on each side but i reckon if u put a steel bush in there it would work. Just my thoughts...

Does anyone know whether you can fix a oil cooler and or filter on a hummer. i want to fit one to improve oil life...

radiators Yeah radiators are ok if you dont hit sticks and i reckon they are not really needed on a bush trail bike cause my mates dad had a wr426 smashed a stick through it but now he had an xr400 and its so reliable never misses a beat + no radiators to fill with dirt and sticks +...