Recent content by matty_02

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. M

    Going to try the new Hummer G4

    I tried filling up the reservior, then pumping the brakes to push it through but got nothing. Then i tried opening that little nipple thing and pumping the brakes again but could only hear air pushing out???
  2. M

    Going to try the new Hummer G4

    Hey Gents, I'm having problems with my rear brake setup on my bike. A little while ago the rear brake line copped a hole in it. So i removed it and have had it off for a while. I finally got a replacement yesterday and put it on. Now the brakes won't actually compress??? I don't get it...
  3. M

    Going to try the new Hummer G4

    Hey Rod, Can you check out that webpage for me and make sure that those 16T & 17T are the correct Sprockets for the front of my bike? The picture and heading looks and reads as though they're REAR sprockets. But the Description says they're FRONT sprockets?? Matty
  4. M

    Going to try the new Hummer G4

    I found the link Rod put up for this store below. Are these the sprockets and chain i need for my bike? Hopefully it is. Has anyone purchased from these guys before? Saturday Night Cycles Saturday Night Cycles Saturday Night Cycles I just can't wait to get this whole issue sorted once...
  5. M

    Going to try the new Hummer G4

    Hey all, LoL thats exactly the problem i had with my chain tentioner. Its a pain in the ass!! At the moment i've got the tentioner sitting as your picture shows but i've adjusted the tentioner alot tighter than to other side to keep the wheel straight. Rod or Nafe, where can i buy...
  6. M

    Going to try the new Hummer G4

    Hey rod, Good idea. Would be good to hear from others how their bikes are going, what problems they've had and what modifications they've made???? Heres a list of issues i've had with mine - Clutch lever snapped off (Very poor quality) - Rear wheel and axel was on an angel, needs to...
  7. M

    Going to try the new Hummer G4

    Hey Rod, This is a modification i definately need to make on mine. I've had no end of dramas with the chain setup on my G4. The roller keeps on slipping in behind that little nipple, which causes the chain to come lose and slip off. I've straightened and bashed it in many of times with no...
  8. M

    Atomik Fury - Cutting out / Spitting and backfiring at high revs (PLEASE HELP)

    Hey hey, Well, after a few nights in the garage me and my mates finally figured out the problem. Initially we thought it might have been a Carby problem so we took that apart and checked it out (Didnt really know what we were doing though). After that we then remembered that during the...
  9. M

    Atomik Fury - Cutting out / Spitting and backfiring at high revs (PLEASE HELP)

    Hi All, Just wondering if we could get some help. My mates Atomik Fury 250cc is playing up. One weekend it was working fine, the next weekend it was cutting out. It starts up fine and idles ok. But as soon as you give it high revs or try to take off it spits and spurts. And even an...
  10. M

    Going to try the new Hummer G4

    Thanks so much for picking up on this guys... Geez, he sure does need a good kick up the arse. Could have ruined the bike thanks to these so called experts!! Trying to make a buck thats all they're doing. No probs rod, i've drained the oil from the bottom plug before, just not the side...
  11. M

    Going to try the new Hummer G4

    Ahhh sh*t!!!! The friken guy at the local motorX accessories store told me to buy fully synthetic oil as it would extend the life span of my engine! What a goose! The stuff i put in is Motor Oil 4T 10W/50 Fully Synthetic. So this stuff is a no no? What should i do now? The guy at the...
  12. M

    Going to try the new Hummer G4

    Hey Rod, I worked it out, not sure exactly what fixed it, but its working sweet now. I think it may have been the clutch. I ended up adjusting it some more, and also running some WD40 down the clutch cable to loosen it up a bit. Also drained the oil overnight and put some good synthetic oil...
  13. M

    Going to try the new Hummer G4

    Hi all, I've having a few problems with the G4 Hummer. On the weekend my cousin gave me his handle bars which originally came from his Suzuki. I cut a few centremeters off each side so they were comfortable for me. HEAPS better than the dodgy original bars which came with the bike. Since...
  14. M

    New Bike purchase, is a 3Litre fuel tank enough?

    Hi all, My best mate is looking at buying a Chinese 250cc. I've got the G4 hummer and another mate has the Atomik Fury!! Neither of these are available to purchase on Ebay so the only one that he likes is this NEW 2008 ProX ALLOY 250cc PIT DIRT BIKE MOTOR THUMPSTAR - eBay Other Trail...
  15. M

    Going to try the new Hummer G4

    Hey Rod, I'm still running in the engine, so havent had the chance to open her up! Can't wait though!! How did the bike go overall, still running ok? I had mine out over the weekend on a bumpy dirt road. Sounded very rattly, i think i need to play around with the suspension to get it...
Back
Top