Recent content by svturtle

Does anyone know how much suspension travel the Atomik Reign Bigfoot's have? By looking at the images i've seen it looks as if its only in the shock body and fork uppers that they gain the extra length, hence i seem to think same travel. I know it's almost sacrilege, but i'm looking to get one...

Just had to post some pics of my 7 year old daughter riding her 70cc that i just bought for her. I honestly thought she wouldn't be confident as both feet only touch ground on tippy toes and she had only ridden a 50cc pocket bike a few times prior and quadbike, no balancing with that. She took...

Thanks for replies, i've ended up just getting the TDR 70cc as it's for a 7 year old girl, the 125 was a bit optimistic i think. It has the crf style swingarm so i can just get a shorter shock as stated above or weld a new bracket lower down tube. Will change shock angle but for intended purpose...

Does anybody know how far down i can lower the forks on an Atomik motox 125 and still be left with about 50mm of travel? no jumping etc, just to ride around on and learn, then raise up later. Want to buy one but it is a bit to tall for the intended rider. Aiming for about 600-650mm max seat heaight.

I'm looking for a pair of fork springs that are from an Atomik Nitrous 160 forks. The forks have 2 springs in each leg, one is firmer than the other, i'm looking for a pair of the firmer springs as i'm wanting to stiffen up the front on a budget. Dimensions of springs are softer spring...

Only put 1 tank through but is more ballsier compared to the YX140 i had in. I will do a comparison soon against the YX140 pitty.

Just some pics of my Mastiff with YX160 fitted. When i buy trailer will get down to Parwan for some action shots:laughing-smiley-002.

Yes thanks, i'll Pm you my details.

Thanks for that, the chain i use on the quad has thicker link plates and it sits to close to the engine case in one spot for my liking. Your right that it'll probably never be an issue. The recessed sprocket gives that 1mm or so more clearance. I just want that style of sprocket for my own piece...

I'm trying to find a 15 tooth #428, 17mm shaft front sprocket that has the countersunk face, not the flat face. I am having no luck anyone know where i could get one. And yes i have tried the site sponsors and Ebay but to no avail. Thanks.

I reckon on the wet sand at low tide this would be awsome. I think for what they are you can't beat them though. No issues with wheels coming off or anything. Still be aware though that this is still chinese built so sea conditions won't do it any favours. You'll have to be very critical on...

I've only had it for about 4 months now but it was 18 months old when i bought it. Only the left and right outer steering ball ends are now due for replacement, needed one bearing for axle other than that it's all good. BTW bearings are normal size you get from bearing joint, not some weird...

I've got the 125cc model which i have put an YX140 into it which will soon be replaced with an YX160/184 kitted?. 125 model and 155 model share same frame, brakes, plastics, swingarm, axle etc. Rear brake lever is different due to kickstart on 155 and different brand shocks. Main frame is...

Anyone, suitable for 150/160 or not?

Hi guy's, i've just transplanted an Atomik YX140cc engine into my Mastiff quad bike and am already looking to upgrade to the 160cc version, "hindsight hey". Still tons better than stock 125 semi auto though:D The 32mm pipe that came with the motor didn't fit due to the chassis being close to...