Search results

I did that and it didnt make a differnce, when im doing slow wheelies lots of the time the bike will stall it didnt used to do this and it is also alot harder to start takes 3-4 kicks with gas

I turned it fully in and fully out both ways and made no difference. What way do i turn it to lean it out? Clockwise or anti? Cheers

I just put a brand new spark as my bike wasnt starting. I took spark plug out and it was black as. Running to rich? So i put new spark plug in and it started i got a mate to hold throttle open a little bit and i screwed air mixture screw in but the revs didnt drop which is what i read should...

Yea it does hesitate when in low revs , but only when i go full throttle otherwise it doesnt, havent replaced coil, and have airfilter oiled, and also if i put the choke on itll just cut out. Thinking this is cause theres to much fuel going in? So running to rich? Gonna do that test mayby...

Yea i can blip rev it without hesitating, its only when at very low revs and i go full throttle. And also when i loosely put my hand over back of exhaust and rev motor i get black stuff on my hand. Is this a sign its running to rich

Bikes going fine, had a good rise yesterday, but one thing, when im at quite low revs and i go straight full throttle the bike will bog and if i dont let off the throttle itll cut out. What do you think causing this? Thanks

Ok do i turn the mixture screw clockwise to lean it out?

This is new plug after a few minutes of idleing

am i running a to rich mixture? Is this why its so black? Thanks

Spark plug was the problem , its going good now , this is old spark plug.

Nah its sweet it just has air bubble when float is full up. Just cleaned out carby and checked that. Its all sweet. Going to a mates and gonna get new spark plug cause dont have right size socket what type spark plug do i need? Thanks

Hey guys gonna check that stuff in an hour or two. ( dont wana piss off the neibours) couple questions tho. Ive got a big air bubble in my fuel filter which takes up most of the filter. How do i get rid of this or will it go away cause its stopping fuel from getting to carb i think or when...

Please someone help. Im meant to be going riding tomoro :(

Nah craig its still not going

Im really stumped. It was starting when i left the bolts loose by accident. Then i went got new oil. And tryed to start and it wouldn't even start then i tightened bolts which made no difference

Nah its all sweet .. Thanks for your help again man really appriciate it

Tryed that it didnt work. Bikes not fireing even with throttle doesnt even give any hint of starting :((

Yea the store didnt have 10-40w , and the gasket is torn yes but last time i rode it was broken aswell and bike ran. Should i try take gasket off and refit it and see if it works?

Is this oil fine to use?

Sorry i forgot name of intake manifold and was just going to say neck thing, i think the problem was the intake manifold being loose cause i just did them hand tight then forgot to tighten. But now it wont start and ive tightend up the bolts now