Search results

I finely got the bike all sorted turned out the kill switch was faulty. It was really strange I connected the switch up to a battery with a test light in the Circuit and it worked the light would turn on and off with the switch but the switch wouldn't work connected to the bike. I only found...

I'm not sure it was on the compression stroke but I was watching the rockers to see when both didn't compress the spring and I put a screw driver through the plug hole to check the piston was at the high point. If both valves a closed it should be on the compression stroke? Sent from my iPhone...

Hi I've got a pitpro 50cc and when I am looking for TDC my cam dot lines up at 3 o'clock and the flywheel T mark at a 12 o'clock notch in the casing is this right. I set the valve clearance the bike starts and runs fine where before it would just start and stall but now I have a loud ticking...

Hi dos you solve the ticking noise If so what was it? Sent from my iPhone using Tapatalk

Yeah what was wrong I have a similar problem? Sent from my iPhone using Tapatalk

Have you check med the valve gaps! I was having the same problem and found my I had no gap at all on the inlet made the adjustments it fired up on the 2nd kick Sent from my iPhone using Tapatalk

I'm also having trouble getting my 50cc pitpro started. It was running great after just adjusting the valve clearance then after my daughter rode the bike through a deep puddle it stopped starting. It had a weak spark then it stopped sparking all together I replaced the CDI unit and the coil...